iFixit - Answers With Device "Dell E193FPc"

Dell E193FPc: Screen not activating start button flashing

Thu, 10 Feb 2022 14:03:50 -0700

Monitor would not 'tun on'.Start button on bottom right hand corner was flashing and screen was blank.

Unplugged all leads and power to PC to get this going.

Don't know why this occurred.

Any ideas?

⟐ Answered February 10, 2022 at 14:03 MST

Dell E193FPc: screen goes black after 1 second

Thu, 06 Feb 2020 20:11:55 -0700

Hi,

My Dell E193FP Monitor goes black after about 1 second after I switch it on. This applies for when I use the "on" button, plug it into the PC, change screen resolution in display settings, etc. It always just shows a picture for 1 second and then goes completely black. The picture I see for 1 second is good and there seems to be no damages in the picture.

Now I'm thinking, if I can get a picture for 1 second, can the screen be repaired?

Cheers,

Christian

⟐ Commented February 06, 2020 at 20:11 MST

Dell E193FPc: Have a white screen on power up

Mon, 06 Aug 2018 15:53:54 -0700

Moniter was on and all of a sudden went white. Now it is always white no matter what I do. Is it a motherboard issue or something else?

⟐ Answer edited August 06, 2018 at 15:53 MST

Dell E193FPc: No picture says in power save mode

Fri, 22 Jun 2018 03:51:14 -0700

When I turn on my TV a blue box appears and says dmspc power save mode

⟐ Answered June 22, 2018 at 3:51 MST

Dell E193FPc: How to connect wifi in that pc

Wed, 11 Oct 2023 07:12:42 -0700

I am disable to connect wifi in dell pc

⟐ Answered October 11, 2023 at 7:12 MST

Dell E193FPc: Screen and start button blicking

Mon, 27 May 2019 07:00:44 -0700

Hello there,

As the title explains it, my screen is blinking (no color) every second with the start button too.

I opened my screen to see what’s going on compared to the other posts here : No bad capacitor, I just ear a buzzing sound near the board.

Do you have any ideas ?

Thanks !

⟐ Answer accepted May 27, 2019 at 7:00 MST

Dell E193FPc: Display darked out in 1 second

Thu, 19 Jul 2018 07:33:11 -0700

My Dell has very similar board layout as this one. It display for about 1 second after each power on and then darked out. Power off and on again give me another second but that's is. I shine a strong light on the screen in the hope that I can see a shadow of the display but nothing. With help from this site, I tear down the case but not able to troubleshoot because of my limited knowledge.

With the power supply board alone (not connect to any other board), tested it and all +5V and +12V output are ok and very stable. Found a pin labled "on/off along the DC out to the controller board (i.e. the one with the VGA port). But no matter I connect ground or +5V to it, the inverter still has nothing out.

Can anybody give me an idea how I can troubleshoot the problem? Thanks in advance.

⟐ Answer accepted July 19, 2018 at 7:33 MST