<![CDATA[iFixit - Answers With Device "Daewoo"]]> https://www.ifixit.com/Answers/Device/Daewoo/All?rss=yes en-US Sat, 04 Apr 2026 00:51:03 -0700 <![CDATA[Daewoo: Por qué no enciende]]>

La tele no enciende

]]> https://www.ifixit.com/Answers/View/932093/Por+qu%C3%A9+no+enciende https://www.ifixit.com/Answers/View/932093 Tue, 23 Dec 2025 21:24:17 -0700 <![CDATA[Daewoo: Standby light blinking infinitely but TV doesnt start]]> Block Image

Hello,

I have a Daewoo tv, model DPP-32F1, after plugging in the power the standby light starts blinking without stopping and the tv doesnt start. I opened the back cover to check the boards. After some testing I saw that the AC-Det is 4.1V instead of 5V. Is that a possible problem and how to fix the tv? Also there are no blown capacitors or visible damage.

⟐ Answer accepted July 30, 2025 at 1:00 MST

]]> https://www.ifixit.com/Answers/View/665030/Standby+light+blinking+infinitely+but+TV+doesnt+start https://www.ifixit.com/Answers/View/665030 Wed, 30 Jul 2025 01:00:14 -0700 <![CDATA[Daewoo: Red light but no switch on.]]> Bush tv DVD combo. Power going to DVD and red light. No power up whatsoever. Ive removed the logic board. Slight deformity on the Q1 component I'm assuming. It has no markings. Would this be my issue.

Update (05/06/25)

Block Image

The diode thing looks to be melted. No writing visible on it.

Update (05/06/25)

Block Image

This is picture of the logic board for reference.

Update (05/06/25)

Block Image

A up close picture of melted part

⟐ Edited by author May 06, 2025 at 12:16 MST

]]> https://www.ifixit.com/Answers/View/898921/Red+light+but+no+switch+on. https://www.ifixit.com/Answers/View/898921 Tue, 06 May 2025 12:16:40 -0700 <![CDATA[Daewoo: The screen was not stable]]> The screen colour was blinking and light screen colour

]]> https://www.ifixit.com/Answers/View/845567/The+screen+was+not+stable https://www.ifixit.com/Answers/View/845567 Tue, 16 Apr 2024 22:58:40 -0700