iFixit - Answers With Device "DJI Phantom 2 Vision"

DJI Phantom 2 Vision: No FPV - black screen only - but it takes photo and video and store

Wed, 15 Apr 2020 13:04:34 -0700

Hi,

I have DJI Phantom 2 Vision which was working well and after a long time I took it out for shooting and found there is no FPV what so ever, although it takes pictures and video when I click from my mobile and I can see them immediately after the shoot, but no real time picture or video.

Is this something you can help me with?

Thanks

Alex

⟐ Edited by author April 15, 2020 at 13:04 MST

DJI Phantom 2 Vision: Vision from camera doesn't show up on my phone screen

Sat, 18 Mar 2017 11:28:55 -0700

The drone and the drone camera are operating but the image of what the camera is seeing doesn't show up on my phone screen. I have tried other phones and the problem is the same no matter which phone I use.

DJI Phantom 2 Vision: Broken Connection on the Vision App. Can anyone help me?

Sat, 04 Aug 2018 07:14:23 -0700

I have a problem in my Phantom 2 Vision. My App Vision always show me Broken Connection. I've made test in others mobiles and tab without success. My camera can film or take a pictures with fisical bottom, and the green light off wifi is always on.

I can connect on my wifi Range Extend and i've made for many time new biding without success to.

I've was checked the cable's camera and its ok and update the camera's firmware to.

Anyone can help me?

⟐ Commented August 04, 2018 at 7:14 MST

DJI Phantom 2 Vision: camera/gimbal makes a constant beep and camera doesnt pan up/down

Thu, 24 Sep 2015 19:23:47 -0700

camera/gimbal makes a constant beep and camera doesnt pan up/down

⟐ Answered September 24, 2015 at 19:23 MST

DJI Phantom 2 Vision: regarding video signal on mob?

Wed, 05 Oct 2016 09:23:27 -0700

model of camera is fc 200 , recording perfectly but no video signal is received on mobile..?

DJI Phantom 2 Vision: Transmitter and receiver binding problem

Tue, 15 Jul 2025 03:16:36 -0700

Hello. How are you doing guys ? guys I have DJI Phantom vision 2 and when i would to fly that quadcopter i didn't pay attention to the calibration process which means i don't perform the accelerometer and GPS calibration and turn on the quadcopter and tried to fly the quadcopter and that quadcopter i couldn't control that and i suddenly disarmed the quadcopter and it felt down suddenly and when i took the quadcopter to the hand that some propellers are broken and upside of quadcopter damaged which near the gps and i screwed off the nuts which means i disassembled that quadopter to try repair that quadcopter and when i screwed off the upper side i saw the GPS module are broken, damaged and when i connect to the laptop via USB cable abnormal compass error showing on the right bottom corner and i ordered new GPS module for that model and i tried to hard reset with abnormal GPS module and it doesn't solve that problem and i upgraded the firmware with PT2 Assistant software and i replaced central circuit board and my quadcopter is flashing yellow led and i read the error instruction manual and there is transmitter doesn't bind to the receiver and i followed some videos to try bind the transmitter and receiver each other but it doesn't affect. what do you think guys can you help me guys do me a favour please!

⟐ Edited July 15, 2025 at 3:16 MST