iFixit - Answers With Device "DJI Phantom 2"

DJI Phantom 2: motors wont start just flashing red lights and cant get gps working

Sun, 31 Jul 2016 03:19:01 -0700

When i cali i don't get green light i just get fast red and orange flashing meaning failed plus i can't take flight i just get red flashing lights can somebody help me please ?

regards

Clarke

⟐ Answer edited July 31, 2016 at 3:19 MST

DJI Phantom 2: Broke Flat cable Gimbal H3-3D

Thu, 10 Nov 2016 05:45:20 -0700

Hey, What's up?

I Broke my ribbon cable from zenmuse H3-3d, not the video usb cable.

Does anybody know how to fix it?

Where can I find it to buy?

Thanks

Solved!

Hey guys. Sorry my english, but i hope help anyone with this question.

I took my broken cable and search one people that try to welding.

3 eletronic story said to me that this rainbbon cable is impossible to welding. But i find one guy, he make the welding and fixed my broken gimbal.

Here is the picture:

I dont fly with the phantom 2 yet, but i turn it on and move the gimbal, and appears to be working.

God Bless guys!

Later i will ask to my other friend to fix my english imperfections!

⟐ Answered November 10, 2016 at 5:45 MST

DJI Phantom 2: Fell out of sky

Sat, 24 Jun 2017 16:30:09 -0700

The battery dies on the controller and the drone fell to the ground from about 10ft and it bent and broke one of the arms. How and where can I get this fixed?

⟐ Answered June 24, 2017 at 16:30 MST

DJI Phantom 2: at thirty feet in the air the drone start flashing red and lands.

Tue, 11 Jul 2023 06:29:51 -0700

I calibrate my drone and everything is green and ready. starts fine and i start climbing. once i'm like 20-30 feet vertical it starts flashing red and then lands. Any ideas?

⟐ Answered July 11, 2023 at 6:29 MST

DJI Phantom 2: Why is my dji phantom doing a noise dive?

Thu, 10 Nov 2016 08:04:01 -0700

My dji phantom 2 is doing a noise dive right at take off

⟐ Answered November 10, 2016 at 8:04 MST

DJI Phantom 2: Why can't I get video feed on my phantom 2 dji

Thu, 16 Nov 2023 12:56:20 -0700

why can't i get video feed on my phantom 2 dji

DJI Phantom 2: DJI Phantom 2 Power Issue

Tue, 25 Jun 2019 11:35:59 -0700

Installed charged battery, turned on controller, press power button on battery to power up drone. Nothing happens. No lights, no buzz not clicks, no nothing.

Where do I start?

DJI Phantom 2: Drone not connecting to the assistant software to diagnose problem

Mon, 17 Jun 2019 09:18:02 -0700

I got a DJI phantom 2 and i crashed it into water. it was in the water for brief time and i dried it and cleaned it, but the battery got damaged and i replaced it. it still did not work, but now the drone starts peeping and lighting but the motors wont start. i tried to connect it to the assistant 2 software from DJI to figure out whether it is the ESCs or the motors, but the software does not connect to the drone. What might be the issue here, is it the mother board?

DJI Phantom 2: Not getting power to the transmitter?

Fri, 16 Mar 2018 19:07:15 -0700

I connected a 2000mw transmitter to my P2 I didn't notice the power /gnd were reversed and I shorted out the transmitter. After reconnecting my 600 immersion I see it doesn't power up. Is there a fuse inside? The thing flys with no issues. Heeeelp

DJI Phantom 2: How to connect boscam ts5830 transmitter to boscam fpv galaxy d2?

Thu, 06 Jul 2017 07:49:13 -0700

I have a dji phatom 2 and as it takes a gopro hero 4 for the camera I am trying to get a signal from the boscam TS5830 transmitter on the drone to the boscam fpv galaxy d2 but cant seem to find the right setting to recieve a picture?

P.s not the most tech savvy guy.

Thanks!

⟐ Edited by author July 06, 2017 at 7:49 MST

DJI Phantom 2: My remote won't take a charge?

Mon, 08 May 2017 17:52:48 -0700

My remote won't take a charge but was working perfectly fine day before?

DJI Phantom 2: TX range to high

Tue, 28 Feb 2017 07:08:27 -0700

Hi.

I cant start my Phantom 2. When i turn it on, the LED lights are a solid red. The problem is the T stick in the remote conrol calibration isnt correct. I need to connect my RC to the Assistance software. i have downloaded the 3.8 Version and the RC 1.2 version. My conroller isnt connecting to the computer. When i plug the RC in to the computer, the software isnt picking up the controller.

What should i do?

DJI Phantom 2: Phantom 2 upgrade to V2+ equivalent

Sun, 31 May 2015 08:35:32 -0700

As a novice to drones, I purchased a Phantom 2 base model. Had I known that add ons to make it comparable to the V2+ are not plug and play, I would have bought the V2+ instead. With that being said, I attempted to add the ground station, iosd, a gimbal, and FPV. I cannot toggle the gimbal control from the X1on the remote, and I have struggled with my add ons. The Naza assistant says I need a new S/N to use the program. Is the Naza Assistant required for the upgrades, and if so, can I contact DJI or NAZA to obtain a S/N?