iFixit - Answers With Device "DJI Mini 2"

DJI Mini 2: Why won't my camera work even after I repaired it

Tue, 10 Feb 2026 17:11:09 -0700

I crashed my drone, and the camera wire attached to it broke as well as the gimbal holder. I repaired the gimbal holder just fine, no problem there. When i fixed the camera flat wire and closed the drone back up, the camera would not connect when powered on. It still flies, but the camera wont show on the phone.

⟐ Answered February 10, 2026 at 17:11 MST

DJI Mini 2: Drone does not respond to controller

Tue, 03 Feb 2026 12:48:24 -0700

I have not used my Mini 2 in a couple of years because of restrictions where I used to live. Now, I have updated all firmaware and fully charged the batteries and the light on the aircraft blinks green. The controller connects to the aircraft, and I can see the image that the aircrtaft sees, on the iphone.. However, the propellors will not respond to the controller, If I press the auto takeoff button, or use the joysticks, nothing happens at all. Any suggestions gratefully accepted.

⟐ Answered February 03, 2026 at 12:48 MST

DJI Mini 2: incompatible gimbal data error

Sat, 13 Dec 2025 09:49:07 -0700

powers on connects to drone, camera rotates left,right, up and down can view through camera. gimbal does not respond to wheel on controler. has incompatible gimbal data on display. will not take off. is i a board problem or a cable

⟐ Commented December 13, 2025 at 9:49 MST

DJI Mini 2: There is no connection to the aircraft

Sat, 13 Dec 2025 02:55:47 -0700

The plane does not fly, knowing that it is connected and the green light is on. There is no connection at all between the drone and the dji mini 2 keyboard.

⟐ Answered December 13, 2025 at 2:55 MST

DJI Mini 2: Why are two of three batteries flashing white lights after charging?

Sat, 13 Dec 2025 02:52:18 -0700

Charging my batteries for the first time. One has charged but the other 2 are just flashing 2 white lights.

Can anyone help me please?

Ange

⟐ Answered December 13, 2025 at 2:52 MST

DJI Mini 2: Activation of a DJI Mini 2SE

Sat, 13 Dec 2025 02:50:15 -0700

When doing the activation procedure a cell problem has occured.

I have reloaded de DJI Fly software and redo the activation procedure but the controller does connect with the drone and there is no message telling me to complete the activation and I have a message in the bottom right corner that says in french "Voir la camera"
But if I select this option it shoe that the unit is not activated.

What would be the other procedure to activate the unit.
Tank you for your help

⟐ Answered December 13, 2025 at 2:50 MST

DJI Mini 2: My dji mini 2 will not hover in place keeps drifting right or left.

Sat, 13 Dec 2025 02:46:26 -0700

DJI mini 2 will not hover in place even when there is no wind. Have tried all the recommended solutions on this site (recalibration compass, IMU, checked propellers and casing and nothing visible.

⟐ Answered December 13, 2025 at 2:46 MST

DJI Mini 2: My DJI mini 2 controller won't charge

Sat, 13 Dec 2025 02:36:36 -0700

My DJI mini 2 controller will not charge

⟐ Answered December 13, 2025 at 2:36 MST

DJI Mini 2: What phones work with the DJI mini 2?

Sat, 13 Dec 2025 02:32:19 -0700

will my iPhone 7 work with the drone?

⟐ Answered December 13, 2025 at 2:32 MST

DJI Mini 2: ESC error after only 58 minutes of flight.

Sat, 13 Dec 2025 02:16:03 -0700

I had flown my mini 2 for 58 mins in total. And left it for a month, when I came back from my travels. I had neatly packed it in its bag inside my closet.

I turned on the mini 2 and it gave me an error ESC. Nothing worked, no updates, it clocks out at 80%, no company help, as I bought it in the USA, but live in Europe.

I'm stuck, it's an $800 brick now. Can you help fix it, I'm super girlie and have none of the gadgets on the fixit page!!! Don't know what to do!

⟐ Answered December 13, 2025 at 2:16 MST

DJI Mini 2: Mini will not power on

Sat, 13 Dec 2025 02:12:38 -0700

After charging my battery and installing the battery, the four lights show and then go off without powering on . What is my problem?

⟐ Answered December 13, 2025 at 2:12 MST

DJI Mini 2: DJI Mini 2 "Vision Sensor Error" (180030)

Sat, 13 Dec 2025 02:10:35 -0700

Does anyone have a fix for "Vision Sensor Error" (180030) for the DJI Mini 2 that does not include DJI support lol? I'd like to learn how to fix this myself and possibly identify why it happened.

⟐ Answered December 13, 2025 at 2:10 MST

DJI Mini 2: How to disassemble gimbal house for stabilizers leg replacement?

Sat, 13 Dec 2025 02:08:19 -0700

Hello.

I've recently flew my drone during a bad weather (strong winds) and unfortunatelly, one of these wind bursts threw it into a three and it fell almost 10m, in the grass, which is great, but even though, the stabilizer broke a leg and lost 2 rubbers.

I've ordered the replacement parts, as they arrive, following a disassembly guide here from Ifixit, I've managed to remove the gimbal housing, but I'm not sure how to proceed with it.

There's some sort of electronic roller on a axis that I'm not sure if I can open.

Looking through the side, there seems to be some copper wires inside

Here's another view from the housing

Replacement Part

Does anyone know how to disassemble this part so it can be replaced?

The most complete video skips this part and goes straight to the gimbal camera.

Thank you for any assistance !

⟐ Answered December 13, 2025 at 2:08 MST

DJI Mini 2: Turns very very slow

Sat, 13 Dec 2025 02:03:41 -0700

Dji mini 2 turns very slow . Doesn't matter what speed it's in. I adjusted the settings and still turns slow

⟐ Answered December 13, 2025 at 2:03 MST

DJI Mini 2: Camera does not tilt or roll

Sat, 13 Dec 2025 02:00:30 -0700

Hello,

My camera does not move on roll and tilt axes, but pan is OK.

I think I have to change the two motor but it not seems possible.

Any advice for this?

Thanks in advance 🙏

⟐ Answered December 13, 2025 at 2:00 MST

DJI Mini 2: all lights stay on for seconds

Sat, 13 Dec 2025 01:58:23 -0700

the lights stay on for only 5 or six seconds then turn off, it seems fully charged.

⟐ Answered December 13, 2025 at 1:58 MST

DJI Mini 2: Pictures fail to download

Sat, 13 Dec 2025 01:54:00 -0700

After taking a picture, I get an error message that says, failed to download try again.

⟐ Answered December 13, 2025 at 1:54 MST

DJI Mini 2: Power system hardware error. Restart aircraft (Code: 30210)

Sat, 13 Dec 2025 01:46:49 -0700

After replacing ESC pcb and flatcable, the Gimbal assy and multicore flex signalcbl and the mainflatcable without cam (cam pcb contains calibration data so kept that with drone and is also not broken I have a clear picture) and last in a desperate attempt even the gps pcb, I keep getting this 30210 error.
I measured 1 Ohm resistance in each motor star-winding, they all 4 do a 3 pulse movement on boot, so I exclude the whole motor part.
With DJI-Assistant2 I tried down- and upgrading in order to trigger factory defaults, downloaded .log and .dat files but they are encrypted and to be read by DJI-technicians only.
This leaves the main pcb BUT i do not know its partnumber or model number to search for on internet and so far prices are close to a complete second hand Mini2!
Is there anybody out there that can help me with my diagnosis ?

I have many photos but do not want to overflow your server :-)

⟐ Edited by author December 13, 2025 at 1:46 MST