iFixit - Answers With Device "DJI Mavic Mini"

DJI Mavic Mini: Gimbal flex broken replacement

Wed, 01 Apr 2026 09:27:44 -0700

I need a replacement on gimbal flex

DJI Mavic Mini: Help with lost mini resistor

Tue, 17 Jan 2023 15:50:35 -0700

Hi.

I managed to lose a mini resistor when I was replacing the gimbal cable after a crash with my DJI Mavic Mini...

Could you help me with the information about the resistor? It's the one on the outerside by the connector of the flat gimbal cable on the mainboard. I've attached a picture showing it.

Regards Lars Jonsson.

⟐ Answer edited January 17, 2023 at 15:50 MST

DJI Mavic Mini: DJI Mini 2 WATER SUBMERSION HELP

Sat, 15 Oct 2022 19:38:40 -0700

I was flying my drone when it hit a tree and it fell on a pool of water that had green things in it (maybe algae idk). We immediately took it out and removed the batteries. It seems it sat there for about 5 seconds. We dried it by shaking it and left it in the sun for some time. Then we used the dryer to dry everything inside. Then I found online that you should immerse it with alcohol to avoid corrosion. So I bought a 70% isopropyl alcohol as 99.99% wasn't available, and poured it over the drone before drying it again with the dryer. After that I left it in a bag of rice for about 24 hours. I tested it with the battery that was affected and it said battery error and also barometer fault or something. I switched the battery and everything worked fine this time. After I took it out, I notice seeing water inside (like small droplets) only to be surprised that they were hard. Now I don't know what to do.

Questions: Shall I take apart the drone to bettery dry it? Did corrosion already set in, was it right using the alcohol? Is 70% ok? Do I have to soak it in an alcoholic bath instead of just pouring alcohol in it? Was the rice a good move? What did those hard water mean? How long should I wait before flying it again? It seems like there was still water inside, what should I do? Do I take it off and redry it again?

Thnx to whoever answers this

⟐ Answered October 15, 2022 at 19:38 MST

DJI Mavic Mini: Why is my gimble middle motor is heating

Wed, 24 Aug 2022 01:16:23 -0700

i change my new gimble assembly . after that its middle motor heating problem

DJI Mavic Mini: My DJI Pocket (not Pocket 2) Audio Recording

Thu, 07 Jul 2022 17:40:35 -0700

Hi there,

My DJI Pocket (not Pocket 2) just stoped recording sound. When I attach an external mic then it does record the sound but not with internal mic. Everything else is working fine. I have already checked the firmware and audio setting. Any help?

Also, I couldn’t find DJI Pocket in the ‘Device Search’ so I just selected DJI Magic Mini just to post my question.

Thank you,

Muhammad

LA, California

⟐ Commented July 07, 2022 at 17:40 MST

DJI Mavic Mini: Mavic air 2 forearm

Mon, 16 May 2022 10:55:20 -0700

is there a guide to replacing the right forearm of my mavic air 2?

⟐ Answered May 16, 2022 at 10:55 MST

DJI Mavic Mini: Arms for Mini and mini2 - compatible?

Mon, 16 May 2022 10:54:01 -0700

Are the arms on the Mavic mini and Mavic mini 2 compatible? Can I fit a Mini 2 arm to a Mini?

Many thanks

Joe