iFixit - Answers With Device "Cricut"

Cricut Maker: Where can I aquire replacement grip rollers

Fri, 05 Apr 2024 05:01:47 -0700

The plastic/rubber rollers that grip the mat have stretched and now are able to migrate inward and outward on the roller bar. I'm hoping to replace them with something better.

⟐ Commented April 05, 2024 at 5:01 MST

Cricut Maker: Where can I get my circut maker repair

Sat, 21 Jun 2025 07:39:49 -0700

Where can I get my circut maker repair

⟐ Commented June 21, 2025 at 7:39 MST

Cricut Maker: USB-B port broken. Bluetooth doesn’t work, how can I go about fixing?

Wed, 09 Apr 2025 17:29:46 -0700

when i ordered the machine ( Champagne Cricut Maker ) from the original cricut website , i tried changing the name of the machine in my bluetooth settings & ever since the bluetooth hasn’t worked forcing my only connection option via usb. I left my machine at my moms house ( many kids there ) when going out of town, i come back to the usb port being broken. What can i do now besides buying another machine?

⟐ Answered April 09, 2025 at 17:29 MST

Cricut Maker: Cricut Maker Machine repairs

Sun, 26 Nov 2023 21:26:00 -0700

Can I request someone to change the rubber rollers on my Cricut Maker machine? If so how?

⟐ Answered November 26, 2023 at 21:26 MST

Cricut Maker 3: Cricut maker won’t turn on

Tue, 28 Jan 2025 04:53:05 -0700

Cricut maker turned off during a cutting process and no longer lights up. The Power cable still delivers 23 volts. After that, it briefly turned on but then shut off again. Now it won’t turn on at all. What could be the cause?

Cricut Maker: Is a blinking red power button fixable?

Fri, 14 Jul 2023 08:22:38 -0700

My power button starts blinking red in the middle of a cut. Is this a fixable problem or any idea what the problem is?

⟐ Answer unaccepted July 14, 2023 at 8:22 MST

Cricut Explore Air 2: Replacement part number for a gear

Fri, 21 Nov 2025 11:43:01 -0700

Hello I am looking for a replacement part, I need a new white gear part.

⟐ Answered November 21, 2025 at 11:43 MST

Cricut Maker: Broken DC barrel jack.

Sun, 05 Oct 2025 11:45:59 -0700

I need to replace the DC barrel jack. What size do I need.

⟐ Commented October 05, 2025 at 11:45 MST

Cricut Maker: The pen housing on my Cricut maker just keeps going up and down.

Sat, 14 Jun 2025 14:05:34 -0700

My cricut maker just stopped working. The pen housing just keeps going up and down and it doesn’t fully turn on. The load button doesn’t load the mat (and pressing it also just results in the housing going up and down).

Here’s a video of what it is doing:

⟐ Answered June 14, 2025 at 14:05 MST

Cricut Maker: Why is the power button remains in red

Tue, 04 Jun 2024 06:25:05 -0700

The power button remains red and does not run anymore

⟐ Answered June 04, 2024 at 6:25 MST

Cricut Maker: Where in Canada can I buy a replacement belt

Fri, 30 Dec 2022 00:57:20 -0700

Where in Canada can I get replacement belt for cricut maker

⟐ Answer edited December 30, 2022 at 0:57 MST

Cricut Explore Air 2: Power won’t come on

Tue, 17 Feb 2026 22:56:13 -0700

My adaptor is green but my power will not turn on

Cricut Explore Air 2: The mat doesn’t upload

Sun, 15 Feb 2026 22:32:25 -0700

The mat doesn’t upload

Cricut Easy Press 2: E05 on Cricut Easy press 3

Mon, 05 Jan 2026 19:44:28 -0700

Right after turning it on, I got the E02 error. After several attempts to turn it on, it started to heat up a little, but then I got the E03 error. I tried turning it on again, and this time I got the E05 error. This error has persisted until now. The last time I used it, it worked without any problems. I've already tried resetting it and unplugging it for a couple of minutes, but nothing worked. Does anyone know what might be wrong?

Cricut Maker: Get repair piece gear for clamp B

Mon, 29 Dec 2025 18:19:04 -0700

Hello everyone

I’ve watched a bunches of YouTube video and dissemble my cricut maker 1 that had a clamp B issue.

After dissembling one piece seemed “melted” or bent I tried to put it back but the dent is broken. I tried to find the detached piece but it’s too specific. Does anybody knows where to find a 3D model of the piece to 3D print it?

I attached some pictures but not sure they uploaded right

Thanks a lot

⟐ Commented December 29, 2025 at 18:19 MST

Cricut: Cricut Explorer 3 comes up with error code.

Mon, 08 Sep 2025 14:12:03 -0700

I recently took my 2022 machine apart because the front roller was offset. I fixed the roller, but now I'm getting this error -45,137.

Cricut Maker: My lights are not working and will not pull in my mat.

Sun, 05 Jan 2025 22:23:08 -0700

So I watched a video to change the rubber on my mat intake. I did everything correct but now my machine is not working and I cannot see it with my computer. The light is not working and will not pull the mat in. What could it be?

Cricut Maker: Sensor Light not working

Wed, 18 Dec 2024 14:44:24 -0700

The sensor light is not reading on Print Then Cut. Can it be replaced? If so, how?

Cricut Maker: Is it possible to obtain replacement motherboard for the cricut maker?

Wed, 24 Jul 2024 03:29:39 -0700

It’s great to be able to open and figure out where the problem is, but is it actually possible to fix or rather replace the motherboards of a Cricut?

Cricut Maker: Cricut maker Gear names

Thu, 27 Jun 2024 15:19:57 -0700

One of the gears in the cutting "head" is broken. Where can I get the name of the gears . Want to print a 3 D replica

⟐ Commented June 27, 2024 at 15:19 MST