iFixit - Answers With Device "Creality Ender 3 Pro"

Ender 3 Pro and V2 32 Bit: How to fix blue screen

Mon, 30 Mar 2026 19:50:48 -0700

It was working then just got blue screen 2 of them

Creality Ender 3 Pro: Why is my printer not wanting to print.

Mon, 03 Nov 2025 13:06:37 -0700

I recently got a Ender. 3 pro and installed new firmware on it because I had the blank blue screen. Once I did that, I tried running a print but all it did was heat up the extruded and bed, then acted like it completed the print.

Creality Ender 3 Pro: Why is my screen beeping and automatically selecting things?

Sat, 16 Nov 2024 08:02:12 -0700

I have an ender 3 pro with an skr mini v1.2 motherboard and the screen keeps automatically selecting and clicking thins and makes weird noises? Any fixes? I have all wires plugged in correctly, I’ve flashed the board, unplugged the system, removed the metal holder from around the screen, tried plugging in things differently and tried different cords but nothing has worked. Any idea for a fix?

⟐ Commented November 16, 2024 at 8:02 MST

Creality Ender 3 Pro: How can I remove broken filament from the hose

Sat, 12 Oct 2024 22:46:12 -0700

I have a problem where the efter cannot move the filament forward and very little is coming out through the nozzle. Unfortunately the filament is broken inside the house so I cannot get out the cut off filament att the end.

Is the problem with the exrruder or the hot end or something else?

Creality Ender 3 Pro: ender 3 pro auto leveling kit I cannot read the instalation leaflet

Sun, 17 Mar 2024 10:48:55 -0700

the instructions for my CR Touch auto leveling kit are unreadable even with my glasses on. Is there a printout available that I can download to enable me to instal this unit

⟐ Answered March 17, 2024 at 10:48 MST

Creality Ender 3 Pro: Why isnt my 3d printer scrolling button working

Fri, 23 Feb 2024 01:54:17 -0700

Scrolling button from my 3d printer doesen"t work, is there any way I could fix that myself ?

⟐ Commented February 23, 2024 at 1:54 MST

Creality Ender 3 Pro: Ekranda gözüken "THERMAL RUNAWAY" nasıl çözülür?

Tue, 13 Feb 2024 07:20:43 -0700

Thermal Runaway

Cycle Power! Temperature drifted to

far from setpoint. Excessive part cooling, improper PID values or failingcomponents can cause this.If problem

persists, connect to serial monitor.Thermal Runaway Cycle Power! Temperature drifted to far from setpoint. Excessive part cooling, improper PID values or failingcomponents can cause this.If problem persists, connect to serial monitor.

⟐ Commented February 13, 2024 at 7:20 MST

Creality Ender 3 Pro: 3d printer bed not leveling

Mon, 14 Aug 2023 11:53:24 -0700

I don't know why, but the back right 3d printer bed leveling knob won't make the bed go up and down when I twist it. I tried taking the knob off and the screw won't do anything at all either. I know that this is probably just a simple piece of hardware that I need to tighten, but I don't want to make the issue worse or break something by just playing around with it.

Creality Ender 3 Pro: Why isn’t my printer printing correctly.

Sun, 16 Jul 2023 20:42:03 -0700

I’ve made everything leveled and every time i try to print the filament bunches up at the nozzle. I’ve had it for a month and I’ve just been struggling to actually get it going.

⟐ Answered July 16, 2023 at 20:42 MST

Creality Ender 3 Pro: printer halted ,please reset

Sun, 16 Jul 2023 03:51:27 -0700

my printer stop working, this massage shows up when i want to print or reset at home offset, i stuck ..........

Creality Ender 3 Pro: Why isn’t my printer going up or down

Mon, 03 Jul 2023 14:27:23 -0700

The spiral part of my printer isn’t raising or lowering the printer preventing it from working what is going on

⟐ Answer unaccepted July 03, 2023 at 14:27 MST

Creality Ender 3 Pro: My prints aren't turning out at all and I have no idea how to fix it.

Sun, 08 Jan 2023 15:08:11 -0700

I've had my printer for a couple of weeks and it's first print was perfect, but the print after that didn't work. the only difference I made was the filament, but even after changing it the problem persists.

I printed something flat and it turned out really nice, but the moment it tries to go upward is when the problem occurs. it just looks like an overflow of filament but I have tried to decrease the output, I have now reset my printer more times than I can count and am lost.

I just have no idea and have asked many friends and they said that they have never seen it. I stopped this print about half way through to maybe troubleshoot and still just don't know.

Creality Ender 3 Pro: Printer restarts after I press preheat PLA

Thu, 29 Sep 2022 18:01:23 -0700

I have an Ender 3 V2, not an Ender 3 Pro, and I was working fine, until one day, when I preheated PLA, the printer froze, showed a loading screen, then restarted. How do I fix it?

Creality Ender 3 Pro: 3D printer blue screen

Mon, 29 Aug 2022 03:15:23 -0700

Built printer, then it turned on. Leveled the plate to the print Nozzle with a piece of paper. I printed 2 test models then a 5 hour model. All 3 models we fine. Then turned off printer. The next day I turned the printer on and only got a Blue screen.

⟐ Answered August 29, 2022 at 3:15 MST

Creality Ender 3 Pro: Motors are no longer functioning

Sun, 24 Jul 2022 12:32:55 -0700

My 3D printer is no longer moving and makes a loud clunk noise when it attempts to move, this happened after I attempted to download south leveling firmware from the creality website, I’ve tried flashing it, and it no longer flashes, I’ve attempted to do all of the fixes presented, like the old firmware on a new SD card in plugging it and plugging it back in, but nothings working. How do I fix this issue

⟐ Answered July 24, 2022 at 12:32 MST

Creality Ender 3 Pro: Why are my prints so innacurate and messy?

Fri, 10 Jun 2022 22:23:49 -0700

I've recently purchased an Ender 3 3d printer(not 3 pro) and have already assembled it. I have also leveled it. Though for some reason, all my prints are extrememly innacurate and messy. Why?

What it was supposed to look like:

What printed:

Of course I stopped the print before It could mess up even more. I've attempted this again and the results were similar.

Other prints also have spacings between the infill and edge

⟐ Answered June 10, 2022 at 22:23 MST

Creality Ender 3 Pro: Why is the extruder only extruder only printing dots?

Wed, 08 Jun 2022 10:45:03 -0700

It only puts out tiny dots, an I can’t figure out why

⟐ Answer accepted June 08, 2022 at 10:45 MST

Creality Ender 3 Pro: The heat bed of my ender 3 pro does not warm (count) up.

Mon, 11 Apr 2022 09:01:20 -0700

Can only print with heat bed at ambient temp.

⟐ Commented April 11, 2022 at 9:01 MST

Creality Ender 3 Pro: do you do tuning

Sun, 10 Apr 2022 06:16:15 -0700

could you tune my 3d printer?

⟐ Answered April 10, 2022 at 6:16 MST