iFixit - Answers With Device "Computer Hardware"

Espon Workforce WF-7620: Is there a way to fix the blue button?

Fri, 03 Apr 2026 05:25:20 -0700

My blue button broke. I need it to change the ink cartridges. Is there a way to fix it, or a way to bypass needing the button?

Asus Motherboard: PSU has power but motherboard won't turn on."

Thu, 02 Apr 2026 23:26:12 -0700

My SMPS is getting power, but the motherboard is not receiving any. How can I troubleshoot this?"

⟐ Commented April 02, 2026 at 23:26 MST

Epson L310: How to fix the photocopy and scan button?

Thu, 02 Apr 2026 18:56:25 -0700

The photocopy button can still be press but it's not functioning anymore. I think it's the wire connecting is the problem. And also, the scan button. It's not functioning too.

LG Display: Not switching on and standby light flickering

Thu, 02 Apr 2026 15:48:43 -0700

Flatron w2234s... Standby light flickering non stop and won't switch on.

Printer: HP laserjet Enterprise M611 error 59.00.c0

Thu, 02 Apr 2026 08:14:00 -0700

HP LaserJet Enterprise M611 – Error Questions

1️⃣ Error 59.00.C0

What does error 59.00.C0 mean on an HP M611 printer?
What part is usually responsible for a 59.00.C0 motor/fuser error?
How can you fix a 59.00.C0 error safely?

2️⃣ Error 48.xx

What does error 48.xx indicate on an HP M611?
Can a hardware failure cause a 48.xx error even if firmware is okay?
How do you troubleshoot 48.xx errors on an enterprise HP LaserJet?

3️⃣ Error 58.xx

What causes error 58.xx on an HP M611 printer?
How can a sticky roller or fuser leak trigger a 58.xx error?
What steps should be taken to fix a 58.xx pickup/motor error?

Logitech Pro X Superlight 2 Dex: Please add some parts for the mouse so I could buy them.my mouse broke

Thu, 02 Apr 2026 05:01:34 -0700

Please sell them for like $40 or something

HP Officejet 6100: My printer will not talk to my phone

Thu, 02 Apr 2026 02:17:27 -0700

My printer

will not talk to my android

⟐ Commented April 02, 2026 at 2:17 MST

Epson EcoTank L3110: Printer not print the black ink

Wed, 01 Apr 2026 07:47:58 -0700

black output is like a charcoal shade, what happened?
I already use water solution, nothing happened.

XYZprinting Da Vinci Mini W: How do I get it to stop clogging the nozzle so I can actually print th

Wed, 01 Apr 2026 02:33:55 -0700

The nozzle clogged up so fast and easy on my friend. I tried twice to unclog it before ultimately pulled the nozzle off and cleaned it out. But the printer seems like it's not getting hot enough or it is moving waaaaayyyyyy to fast to actually lay the print. Please help I'm losing my mind on this sht

Motherboard and CPU: Mother board is short circuit

Wed, 01 Apr 2026 00:07:10 -0700

Computer is not starting

Because

Mother board and CPU short circuit

How to fix it ??

⟐ Commented April 01, 2026 at 0:07 MST

Logitech B Series: How to repair it

Tue, 31 Mar 2026 07:57:38 -0700

The sencer of mouse is not working

⟐ Answered March 31, 2026 at 7:57 MST

LG Flatron W2241S: Tv overheating and switching off

Tue, 31 Mar 2026 01:44:53 -0700

Tv dims in the middle

LG 27UL850-W: No signal showing in display

Mon, 30 Mar 2026 21:51:58 -0700

No signal showing in display

Ender 3 Pro and V2 32 Bit: How to fix blue screen

Mon, 30 Mar 2026 19:50:48 -0700

It was working then just got blue screen 2 of them

Canon G3010 Printer: Conwere belt ke bagal me plastic ka transparent strip khul gaya ha

Sun, 29 Mar 2026 22:36:51 -0700

Conwere belt ke bagal me plastic ka transparent strip khul gaya ha

Cable Modem: Motorola MB8600 Only has a light on the bottom (Ethernet)

Sun, 29 Mar 2026 05:20:53 -0700

I have so far rebooted and reset in all ways that I could.

I am able to log into the admin console it gives me the following errors:

CMSTATUS:US_ Diplexer_Mode_Change:Fixed lnitial, 5-42MHz.

SYNC-Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing(MAC Address Here):M-OOS=1.1:CM-VER=3.1

Trying to see if this is in fact something that I can fix or if it's not worth my time -- either way I appreciate anyone's input

⟐ Edited by author March 29, 2026 at 5:20 MST

SanDisk Cruzer Blade: The cruzer blade is rot read by my computer and pc

Sun, 29 Mar 2026 02:22:40 -0700

I inject the drive in the USB socket. It shows the USB drive is there but any files of the cruzer blade do not open.

HP Z3700 Dual Mouse: My mouse got damaged after constant falling

Sat, 28 Mar 2026 15:28:30 -0700

my mouse kept on falling now it only lights on but no response

⟐ Commented March 28, 2026 at 15:28 MST

Epson XP-200: Nelze komunikovat se skenerem

Thu, 26 Mar 2026 01:14:46 -0700

Po zapnutí xp 205 se po chvíli rozsvítí trvale zeleně wifi ale tlačítko napájení bliká. Za další krátkou dobu se rozblikají všechny kontrolky. Zajímavé je, že při tomto stavu lze bez problému tisknout ale nikoliv skenovat - hláška nelze komunikovat se skenerem.

Dell Monitor E2310H: Display conner color patch

Wed, 25 Mar 2026 03:35:19 -0700

Display conner color patch