iFixit - Answers With Device "Coffee Maker"

DeLonghi ECAM Series: Why is the autorinse not starting?

Tue, 30 Jun 2026 14:07:26 -0700

Hi,

My DeLonghi ECAM 220.22 Magnifica Start is stuck during startup. The automatic rinse never starts.

The issue started after making a coffee. About 5 minutes later, i smelled something burning. The machine became very hot and the plastic support around the thermoblock slightly melted (i checked it).

Now:

The machine turns on.
The brew group moves.
The lights keep flashing while waiting for the auto rinse.
No water comes out.

I checked:

Hoses are clean and not kinked.
No visible blockage/limescale in the thermoblock.
Wires/connectors look normal.
When disconnecting the inlet hose to the thermoblock, only a tiny amount of water comes out (when I power it back on).

Thanks!

⟐ Edited by author June 30, 2026 at 14:07 MST

Krups Nespresso XN 2140: There’s not enough coffee extracted.

Fri, 19 Jun 2026 18:47:05 -0700

There’s not enough coffee extracted.

Keurig K-Duo: Why too much water?

Fri, 12 Jun 2026 13:34:27 -0700

Keurig k-duo essentials new not measuring right amount of water for pot coffee. Always too much.

Bravilor Coffee Maker: Bonamat th10 error 12 was tun

Sat, 30 May 2026 01:49:44 -0700

How do i fix error 12 bonamat th10

Bosch Coffee Maker: Why won’t make coffee?

Mon, 25 May 2026 14:40:44 -0700

Stream wand works but no coffee will come out! Help!

⟐ Commented May 25, 2026 at 14:40 MST

Saeco XSmall: My red and green light is on all the time.

Tue, 19 May 2026 01:51:27 -0700

The red and green light is on all the time. I have switched it off and primed the water, but the machine is just stuck.

Nespresso CitiZ: Leaked after perfereted plate

Mon, 18 May 2026 11:35:49 -0700

Hi,

I have noticed that some of the coffee is leaked into the collector basket. In between the nossle and the brewing unit. I have taken the machine apart and tried to install a new brewing unit but some coffe Is still leaked into the collector basket. I have tried to clean the plate that punctures the pod but still coffee leakage happens. Any idea what could cause this and how I can fix it?

Fredrik

Keurig K-supreme: Where does this black double-hook spring go in a Keurig K-Supreme K921?

Sun, 17 May 2026 15:52:24 -0700

A black double-hook spring, approximately 5/16” in diameter and 3/4” long, fell out of my Keurig K-Supreme (Model K921). I have confirmed it is not part of the K-Cup pod holder assembly.

The handle/lid area seems like a likely candidate, but I cannot see any obvious anchor points or hooks where it should be reattached. Where exactly does this spring belong, and what are the steps to reattach it? Does it require partial disassembly of the head/handle housing to access the mounting points?

⟐ Commented May 17, 2026 at 15:52 MST

Keurig K-Duo: My Keurig doesn't want to reset after discale

Fri, 08 May 2026 14:29:51 -0700

How can I reset after discale

⟐ Commented May 08, 2026 at 14:29 MST

SiFENE KC101: Parts - baskets for ground coffee and basket for tea

Tue, 05 May 2026 11:05:48 -0700

Where do I find parts (baskets)

Keurig Coffee Maker: I made a cup of coffee. Now the lid won't open. It's stuck.

Mon, 04 May 2026 13:44:30 -0700

I made a cup of coffee. Now the lid won't open at all. It's stuck.what should I do?

⟐ Commented May 04, 2026 at 13:44 MST

Keurig 2.0-400: How to install replacement keurig 2.0 upper needle gasket 400 series

Sun, 03 May 2026 09:30:23 -0700

Any graphics or illustrations available to show proper installation

DeLonghi ETAM family: I have a rivelia that does not remove the puck

Sun, 03 May 2026 06:21:59 -0700

I have a rivelia that does not sweep the used puck away. Any help would be appreciated.

Keurig K-supreme: Why is my Keurig stuck on 12oz

Sun, 26 Apr 2026 21:52:02 -0700

My Keurig is stuck on 12oz and power button is stuck at on but will not make coffee

DeLonghi ECAM Series: waartoe dient de microschakelaar in de bovenste brouwzuiger?

Tue, 05 May 2026 12:11:46 -0700

function of the microswitch?

⟐ Edited May 05, 2026 at 12:11 MST

Siemens EQ6: My grinder motor burned stuck. New motor assembly installed not workin

Sat, 11 Apr 2026 07:15:53 -0700

My grinder got stuck and burned out. I can see from outside the motor all the wires burned inside. I bought a new motor assembly (with cables and everything) and did a swap. Now new grinder does not move at all , The machine does full coffee preparing process but only water comes out.

Can this be the same mosfet burnt that makes the grinder run forever or should i look for something else?

Nespresso Delonghi Lattissima Touch: Latissima Touch - Fails to complete the descaling process

Fri, 10 Apr 2026 05:29:41 -0700

Tried to descale the machine (when prompted by the flashing light).

Descaling cycle completed, but after filling the tank with fresh water the machine switched off when the froth button was pressed to start the rinse cycle.

Tried to run the whole process three times - no change.

So can't complete the rinse and the descale light continues to flash.

Any similar experience and suggested fix out there?

Siemens Coffee Maker: Touch Display not working on Siemens EQ500

Thu, 09 Apr 2026 08:28:26 -0700

Hello

Only the on/off button works on my touch display on Siemens EQ500. Any idea how to fix it?

Philips EP2200: Milk frother not working properly

Tue, 07 Apr 2026 16:21:30 -0700

My steam point for frothing milk seems to not have enough power? Hardly even warms the milk

Lavazza Coffee Maker: Water in machine sign on display

Sun, 29 Mar 2026 09:10:26 -0700

The display on my coffee maker is showing an orange water indicator. I have emptied everything.

Is there water inside the machine somehow?