iFixit - Answers With Device "Chrysler 200"

Chrysler 200: ECM replacemnt, what to do afterwards

Sat, 08 Mar 2025 11:01:25 -0700

So I’ve ordered a “plug and play” ECM my mechanic told me I needed to take it to the dealer but the dodge dealership around here is terrible and I’m going to an automotive school. I called the dealer to find the part number and it’s been shipped from a good website I got it programmed to my VIN and it’s the correct ECM but I want to replace it myself for the learning experience and for the money ha, I just want to know how important it is to use a scanner afterwards to check for any codes that didn’t connect and what codes might pop up. Could I do this in my driveway or should I take it to my mechanics class and get my teacher to help (using the scanner at school) This Chrysler 200 is a 2013 and I just want to say I’m still able to drive my car with a faulty ecm I’m not sure how but that’s what makes me think it’s not completely failed yet but it could fail on me at any moment which makes me nervous.

⟐ Answer edited March 08, 2025 at 11:01 MST

Chrysler 200: How to open fuel pump

Wed, 25 Sep 2024 11:15:38 -0700

How to open a fuel pump, clean it, and return it to its place

⟐ Answered September 25, 2024 at 11:15 MST

Chrysler 200: ECM connector locking mechanism doesn’t work. Can I manually unlock it

Thu, 13 Mar 2025 15:29:57 -0700

I’m replacing a plug n play ECM and I’ve gotten as far as the first connector but this second connector it’s like when I unlock it instead of unlocking the whole connecter only the cover panel for the wires to it come off. I can see where the locking lever pushes ridges and unlocks it, should I just use a flathead and keep trying to manually unlock it? This is a DIY project but if I need to just stop and get my automotive teacher to help that’s fine.

⟐ Answer accepted March 13, 2025 at 15:29 MST

Chrysler 200: What oil should I put in a 2016 chrasler 200c 2.4 engine

Fri, 23 Aug 2024 07:27:27 -0700

what oil should i put in a 2016 chrasler 200c 2.4 engine

⟐ Answer edited August 23, 2024 at 7:27 MST

Chrysler 200: While car in d, car doesn't move, and rpm raise

Sun, 29 Jan 2023 01:27:49 -0700

When I put gear in drive, the car doesn't move and the rpm meter goes up

While in reverse, it work but d-1 and 2, no. Rpm meter raises when I accelerate. Year of car is 2014 chryselor 200.

⟐ Commented January 29, 2023 at 1:27 MST

Chrysler 200: ماهوه رمز لشاشه الساره انا اشتريتها مستعمله واريد افتح الكود ماهوه الك

Fri, 21 Nov 2025 02:29:57 -0700

اريد فتح كود شاشه c200قمت بشراء واحده مستعمله

What is the code for the screen of my used car? I bought it used and I want to unlock it. What is the code?

I want to unlock the screen code for my C200. I bought a used one.

⟐ Edited November 21, 2025 at 2:29 MST

Chrysler 200: I have a clicking sound coming off and on from the steering column

Fri, 22 Aug 2025 12:23:46 -0700

I have a clicking sound coming off and on from the steering column or under the dash.

Chrysler 200: 3d print window control

Fri, 25 Jul 2025 15:43:28 -0700

Is there a diagram that shows the inner workings of the window control for driver side I want to 3D print the drivers window button. The cheap plastic snaps on the control buttons easily don't want to replace the whole part

Chrysler 200: Why is my car stalling and my traction control light comes on?

Tue, 01 Jul 2025 12:23:06 -0700

Car stalls when going up a hill or incline and traction light comes

Chrysler 200: chrysler 200S: off-center metallic rotation noise in D or N

Fri, 23 Aug 2024 06:56:09 -0700

It seems to be faster as the car moves forward faster. It happens in drive and neutral. It seems to be front of car. This is not AWD. It is 6cy. There is a rub or drag sound. The inconsistency or pulse is why it seems off-center. I assume it’s a rotation noise.

As there is no error code the dealership throws up their hands. I have the factory extended warranty.

These are the various things said by the dealership or replaced:

replaced engine idler pulley and bearing,
replaced transmission mounts,
replaced motor mounts.
I have put on new tires.
They verified brakes are good. The brake rotor is not warped.

I don’t speak-car sufficiently to isolate it. First no one else could hear it. Now my friends without acute hearing notice it. Over time it is becoming louder.

Does anybody have any great ideas what this might be?

⟐ Answered August 23, 2024 at 6:56 MST