iFixit - Answers With Device "Cardinal Health Ventilator"

CareFusion LTV: Does anyone know what Bloom Energy is fixing on these?

Mon, 18 Apr 2022 10:12:26 -0700

Lots of PR about Bloom Energy fixing these LTV 1200. 500 so far.

What are the common fixes ?

⟐ Answered April 18, 2022 at 10:12 MST

Viasys Bear Club 750 Ventilator: Are service kits still available?

Tue, 31 Mar 2020 16:45:25 -0700

I have been told that there are few rubber parts that can perish. Are service kits sill around for them?

⟐ Answered March 31, 2020 at 16:45 MST

Viasys Infant Flow SiPap Ventilator: Calibration Issues Viasys Infant Flow SiPap Ventilator

Tue, 27 Dec 2022 00:45:13 -0700

CAN SOMEONE ASSIST PLEASE?

The calibration was not successful. The Sipaps were unable to calibrate the concentration of oxygen at different concentrations that is 21 & and 100%. Failure to achieve this means that they cannot proceed to initialize and be used.
They were able to calibrate for 21% which is the normal concentration of oxygen in air. However, they were unable to calibrate 100% oxygen concentration which is the maximum possible concertation.
As such, I requested that we carry out testing for the quality of oxygen being supplied and detect its maximum concentration before retesting the Sipaps.
Results of testing the quality of oxygen being supplied.
After acquiring an oxygen analyzer, the first results of air quality were 34% of oxygen concentration and this could not produce an accurate calibration test.
We changed the oxygen supplier and the next test for new oxygen delivered was 91%. This improved quality however was not 100%. Carrying out another calibration test was also not successful as the Sipap could only calibrate the lower 21% but not the 100%. The results for calibration were improved after changing the supplier of oxygen as the Sipaps were able to detect up to 89% oxygen in the air supply. This however still falls short of the required 100%.

⟐ Commented December 27, 2022 at 0:45 MST

CareFusion LTV: When I turn on the equipment, SRAM remains showing

Fri, 16 Dec 2022 08:19:47 -0700

I have a problem, when I turn on the equipment, SRAM remains showing on the screen emitting a loud beep and the equipment stays in that mode without being able to use it. I don't know what to do

Cardinal Health Vela Ventilator: Leak test failed - Flow sensor disc

Tue, 26 Jul 2022 09:38:54 -0700

Recently, one of our units encountered the error of FLOW SENSOR DISC during the leak test.

I have checked all the tubings and I've tried replacing the flow sensor as well, Nothing worked out.

Any suggestions?

Viasys Avea: Why does it appear the alarm: not portable?

Tue, 12 Jan 2021 16:47:05 -0700

why does it appear the alarm “not portable” in the avea..

it just turn the led of alarms in red and appear the alarm mentioned above, the ventilator is working well, is just the alarm sometimes