canon 750D error 30

canon T61i error 30

canon 750d shutter ripless replacement error 30

⟐ Commented August 11, 2022 at 18:06 MST

The LCD is supposed to flip its orientation when folded out and physically rotated (for selfie mode or when folded back into the camera body to face out). However, now the display does not flip its orientation when physically rotated. It still works, but when rotated back into the body of the camera, the screen, including images and menus are upside down.

This seems to be quite common for the T6i, as well as other canon models such as the 60D. I’ve done some searching online, and a friend with the same camera has this issue as well.

My question is how do iFixit? My guess is there’s a sensor in the hinge that’s malfunctioning. It looks like the hinge mechanism can be accessed separately from the LCD and the main body of the camera. Has anyone successfully fixed this at home?

⟐ Commented April 18, 2022 at 13:42 MST

is that normal or something got fried... can someone help me with diagnosing that... Thanks

Edit: After randomly voltage testing some components on the motherboard and DC powerboard (see photos) motherboard recives voltage on some points and steps it down, but still nothing on displays.... Tried with dummy battery so I can connect volage meter to see if it draws some current, sadly 0.00A, working camera draws from 0.03 - 0.11A in standby (0.03A when switched off) and 0.25 - 0.39 when display is on or taking pictures...

(Here are marked points where I tested voltage in refference to ground)

After some more testing with dummy battery and power supply strange things happening: I managed to get some voltage on that connector that was 0v on every pin (1st photo in post), it was 1.2v and it started drawing 0.11A manage to get it by turning power supply off and back on so I'm not even touching the camera, most of the times nothing like before, but roughtly every 10th try it shows voltage and starts drawing current I can replicate it by turning power supply on and off 10 more times... does someone know could it be loose BGA chip somewhere and how to test it?

⟐ Commented January 01, 2023 at 11:43 MST

I use Godox TT685C it worked on my Friend’s DSLR

I think The Problem is the Hot Shoe Maybe

*The little piece of metal that hides the Screws is missed.. but it doesn’t affect*

i tried Godox V1 and TT860 but also didn’t work

⟐ Answer edited October 04, 2020 at 17:49 MST

⟐ Answer accepted November 14, 2022 at 9:04 MST

Thank you!

⟐ Edited November 22, 2024 at 19:00 MST

Bettery is fully charge.

New memory card.

But still I face this problem please help me.

⟐ Answered September 10, 2022 at 15:29 MST

Each time I replace the battery in Canon 750d, a screen appears asking for a date and time. The time settings are not saved in the camera when it is without a battery. Why does this happen and how can I fix it?

⟐ Commented July 12, 2022 at 6:59 MST

I searched for solutions on the internet before posting this here. I didn’t find a quite matching description of my problem. that’s why I thought I should ask by myself.

Anyone faced this same problem before ??

⟐ Edited November 22, 2024 at 19:17 MST

⟐ Answer edited May 24, 2020 at 12:23 MST

It's at the start of my trip and I'm in tears because nothing is working and I have limited resources!

anything is helpful and will kick myself if it was a simple fix when I get back home

Thanks for your help!!!

⟐ Edited November 23, 2024 at 18:21 MST

⟐ Edited November 22, 2024 at 19:00 MST

⟐ Edited November 21, 2024 at 5:09 MST

⟐ Commented May 30, 2022 at 11:31 MST

⟐ Commented November 27, 2021 at 15:58 MST

⟐ Marked as duplicate November 26, 2021 at 20:30 MST

⟐ Edited November 23, 2024 at 17:49 MST