iFixit - Answers With Device "Brother HL-1112"

Brother HL-1112: Printer doesn't print, only blinks

Mon, 25 Nov 2019 05:41:28 -0700

So, my Brother HL-1112 toner had been refilled recently. When I turn it on it runs through basic heatung up procedure, but stops in the middle of it and just blinks with yellow light. Printer is connected via usb, but does so even when not connected at all. On the computer it's somewhy displayed as Brother HL-1110. When I try to print something it just doesn't add document to queue and troubleshooting doesn't detect anything. Drivers are up to date (at least device manager says so). Reinstalling the printer hadn't changed anything, nor did turning printer off and on and I have no idea what will

⟐ Commented November 25, 2019 at 5:41 MST

Brother HL-1112: Brother printerwont connect to my wifi (but its showing other wifis)

Thu, 11 Apr 2024 17:23:58 -0700

I've been using the model without any problem for a month since i bought it, but it suddenly disconnected from my wifi. I reset the network setting and tried to connect to my wifi again through setup wizard, but it's not showing my wifi (SSID) any more while it has other wifis from my neighbours. The router is located about 20cm away from the printer on the same desk, and my other devices including phone, ipad and laptops are well connected to my wifi

⟐ Answer accepted April 11, 2024 at 17:23 MST

Brother HL-1112: HL-2340DW Misfeeds During 2-Sided Printing Cutting Off Image On Side 2

Tue, 18 May 2021 05:32:45 -0700

Hello! When I print two-sided about half the time the second side of each page (which prints first) misfeeds so that the image is too high on the page, thus cutting off about 1/2” of image. Thoughts? Thanks.

⟐ Answer deleted May 18, 2021 at 5:32 MST

Brother HL-1112: Why is my Brother HL-1112 printer stopping half-way?

Mon, 23 Apr 2018 23:27:55 -0700

Here's a video of what is happening: https://drive.google.com/open?id=1ZKjaE4... (At 0:20 I push the only main button 3 times to make a Settings/Test Print)

I opened up everything to being able to see what is going on but I can't seem to understand it. The paper feed roller looks working, because the paper is getting in the toner/drum unit.

The paper gets printer for about 1/3 and then stops.

Also strangely I somehow got to print a full Test Print, but it was the first print of the day I tried. It never happened again.

When the paper stops printing this results as a Paper Jam on the PC.

I tried changing the drum or toner unit but it seems it didn't work, could it be a more subtle problem?