iFixit - Answers With Device "Blender"

Ninja Professional Blender 1100 watt: Why is the power light blinking?

Thu, 02 Apr 2026 20:06:23 -0700

I plugged my blender in and hit the power button, but when I select a speed or press pulse, it wont blend. The red power light just keeps blinking.

⟐ Commented April 02, 2026 at 20:06 MST

Magic Bullet NutriBullet: Why has my NutriBullet stopped working?

Fri, 12 Apr 2024 08:35:51 -0700

My nutribullet was working fine, but then one day the motor sounded like it was working on half speed/low intensity and failed to chop/blend anything. I have given the unit a clean, but to no avail.

⟐ Commented April 12, 2024 at 8:35 MST

Ninja NJ600: Why are the blender blades not rotating?

Sat, 02 Nov 2024 15:30:30 -0700

The blender is plugged in, powered up, and properly assembled. However, when I try to run the blender with food in it, the blades do not rotate.

⟐ Commented November 02, 2024 at 15:30 MST

Blendtec Total Blender: Why is my blender smoking?

Wed, 24 Apr 2024 22:09:42 -0700

My blender has been louder than normal for a few days and today it started smoking and when I lifted the jug off there was a lot of black flakes. Any ideas what is wrong with it and how I can fix it?!

⟐ Commented April 24, 2024 at 22:09 MST

Blender: 120V equipment burn by connected to 240v

Sun, 23 Nov 2025 11:20:54 -0700

HI,

Got a Ninja NJ600 from the States (120v) and wanted to use it in Europe (240v). But, had an accident and got plug in to a 240v power plug directly, and of course it went silent.

I have dismounted the unit and made a number of pictures. Of this the electronic board was burn in one area.

I need to know first, if this information and pictures are enough to get a response?

Second, how I can I fix it?

And last, can I make it 240v capable?

Thank you in advance.

Jacobo PM

⟐ Commented November 23, 2025 at 11:20 MST

Magic Bullet NutriBullet: Cup stuck to base of NutriBullet

Mon, 09 Feb 2026 01:49:30 -0700

The cup of the magic NutriBullet is stuck to the base , can’t remove it

⟐ Commented February 09, 2026 at 1:49 MST

Ninja Professional Blender 1100 watt: Why won't it turn on

Fri, 27 Feb 2026 13:38:43 -0700

My ninja blender 1100 won't turn on at all please help me fix it.I checked everything except for the engine.I put the cup in and the light won't turn on.

⟐ Commented February 27, 2026 at 13:38 MST

Nutri Ninja BL450: Why does the blender get loud and smell?

Sat, 19 Apr 2025 12:47:25 -0700

The blender started being much louder and there is a burning smell coming out of the base. Where should I start if I want to fix it?

Should I order any parts? Or can I just maybe grease it somewhere?

⟐ Commented April 19, 2025 at 12:47 MST

Magic Bullet NutriBullet: Why does the NutriBullet leak?

Sun, 29 Mar 2026 13:14:30 -0700

There is spillage coming from my NutriBullet.

⟐ Commented March 29, 2026 at 13:14 MST

Ninja NJ600: Why will my NJ600 not turn on?

Sun, 29 Sep 2019 09:22:35 -0700

I have the blender plugged in, and have made sure that there is no break in the power cord. The power light will not turn on, and the blender does not run when I try any of the buttons.

⟐ Commented September 29, 2019 at 9:22 MST

Bamix Pro-3 NSFY: Motor is not working

Sat, 07 Feb 2026 12:45:39 -0700

I don't know what happened blender is not working and motor is not working

⟐ Commented February 07, 2026 at 12:45 MST

Cuisinart Smart Stick CSB-75: The lock/unlock button does not stay locked

Fri, 20 Feb 2026 13:48:55 -0700

just bought Cuisinart smart stick csb-75 and the lock/unlock button does not lock when pressed in.

⟐ Commented February 20, 2026 at 13:48 MST

Ninja Professional Blender 1100 watt: Why is the lid so hard to remove?

Mon, 03 Feb 2025 06:55:04 -0700

After using my Ninja blender, the lid is always stuck. I always have to ask my Dad to remove it. Why is it getting stuck after I make my smoothies?

⟐ Commented February 03, 2025 at 6:55 MST

Nutri Ninja BL450: Why won't the motor start?

Tue, 13 May 2025 22:22:07 -0700

When I put the cup on the base and try to blend the ingredients, nothing happens.

⟐ Commented May 13, 2025 at 22:22 MST

Magic Bullet NutriBullet: Changing the plastic that attaches to the blade

Thu, 01 Dec 2022 17:08:36 -0700

When you take out the cup that contains the blades you'll see a plastic circle with a nut in the center to hold it to the motor. That plastic broke & I have bought a replacement but can't get the old nut off the motor. Suggestions?!?!

⟐ Commented December 01, 2022 at 17:08 MST

Oster Blend-N-Go My Blend: Why won't my blender turn on?

Mon, 30 Jun 2025 10:26:14 -0700

My blender is plugged into a power outlet, the arrows on the bottle line up with the arrows on the base, and the blade assembly is fully attached, but it still won't turn on. What should I do?

⟐ Commented June 30, 2025 at 10:26 MST

Oster Blend-N-Go My Blend: Why won't my blades turn?

Wed, 08 Jan 2025 12:30:38 -0700

When ever I get ready to blend everything for a smoothie, I go to turn on the blender and hear motor turn on, but the blades won't move. Why?

⟐ Commented January 08, 2025 at 12:30 MST

Magic Bullet NutriBullet: Why don't the blades spin and/or make a noise?

Tue, 22 Dec 2020 12:45:01 -0700

The blades on the NutriBullet refuse to spin and there is no sound coming from the power base.

⟐ Answer edited December 22, 2020 at 12:45 MST

Blendtec Total Blender: Whats the model number of the switch?

Sun, 30 Mar 2025 12:33:26 -0700

I need to replace the power switch on my blendtec it's faulty what's the model number so I can replace it.

⟐ Answered March 30, 2025 at 12:33 MST

Magic Bullet: smoke and burning smell was coming out of my magic bullet

Mon, 10 Jan 2022 18:35:43 -0700

Some kind of smoke and burning smell was coming out of my magic bullet.It happened at my first time use.

Am I need to buy any special adapter for power , ?

Please advise am not in USA for repair and replacement.

Need your help to use my magic bullet properly.

Thanks in Advance

Srinath

⟐ Answered January 10, 2022 at 18:35 MST