iFixit - Answers With Device "Blender"

KitchenAid Blender 5KSB52 Ultra Power Machine: Why is it not working

Fri, 22 May 2026 05:03:30 -0700

When I was using it suddenly the blender start smelling and after it stop working

BlendJet 2: It bms switch has been broken

Tue, 31 Mar 2026 00:45:45 -0700

It bms switch has been broken

Nutribullet 1000 (NB-202): Noisy motor bearing on operation

Sun, 22 Mar 2026 17:03:00 -0700

Has anyone repaired a failing/noisy motor bearing on a Nutribullet 1000, NB-202, and can provide a link to the correct sized replacement bearing?

The unit is still blending well, but I can't help but notice that the motor bearing is becoming louder and louder - and am hoping to repair it before failure.

Ninja Professional BL610: WHy my Ninja CO610B red light is blinking and can't start

Mon, 09 Mar 2026 11:36:43 -0700

Why my Ninja CO610B red light is blinking and can't start

Magic Bullet NutriBullet: Why is my motor smoking?

Mon, 02 Mar 2026 11:50:25 -0700

Motor smoking and smells like burned plastic?

Bamix Pro-3 NSFY: My motor is broken and is not rotete

Wed, 25 Feb 2026 09:02:35 -0700

It has lickage

Oster 12 Speed Classic Series Blender: One common failure of the original Oster blender

Wed, 11 Feb 2026 08:55:45 -0700

This is not a question, but a comment about one common failure in tbe 1980s. I found it in a workmate's blender who gave it to me to fix it. Then I found the same problem in my mother's own blender.

The symptom is basically that the blender motor does not operate. I opened tbe blender base and studied the wiring. I found the problem quickly. One of the solder points of the wire at the commutator contacts was open. Resoldering fixed the problem. So I believe that it was caused by some assembly employee doing a bad soldering job.

Bamix Pro-3 NSFY: Motor is not working

Sat, 07 Feb 2026 12:45:39 -0700

I don't know what happened blender is not working and motor is not working

⟐ Commented February 07, 2026 at 12:45 MST

Nutri Ninja BL450: Inside base very dirty with what looks like grease

Mon, 26 Jan 2026 19:03:51 -0700

I took apart the base of my Nutra Ninja because of the loud noise and smelling. Noticed it is quite filthy with what looks like grease but am not sure. Should I look for anything else causing this filth?

Ninja Blender: Blender making noise after it was wrongly plugged in wrong voltage

Sun, 23 Nov 2025 12:38:35 -0700

Hi I have ninja deluxe blender which 120 voltage but my son plugged it in 230 voltage I found it making noise and dust at the bottom is there a way I can fix it please it’s ninja deluxe CO905KS

Nutri Ninja Ninja Blender Duo BL641: The main engine not spinning only making working noise. No Spin

Mon, 06 Oct 2025 14:10:20 -0700

It's on, all light indicators perfect. But no Spin. I guess the main engine is the one not spinning. The cup is fine.

Nutri Ninja Ninja Blender Duo BL641: Blender activation switch - Cup Mode

Mon, 25 Aug 2025 07:57:41 -0700

When using the blender with a single cup on it, more in the style of the nutribullet.

You screw the blades on and lock it in place and in doing so it pushes down 4 plastic pieces. Not all are connected but one of those that is connected has been bashed too many times and is collapsing.
Is there a way to replace this? Or will I need to try and "build up" the top of the button?

Vitamix 5200: At higher speeds, the blade stops

Fri, 30 May 2025 04:50:17 -0700

I have noticed that when I am blending something I have to very slowly and incrementally move the dial to build the speed. If I turn the dial too quick the blade will stop or flutter. How can I fix this?

Blender: My blender stopped working

Sun, 13 Apr 2025 22:57:15 -0700

My blender started smoking and stopped is it safe to use it again

⟐ Commented April 13, 2025 at 22:57 MST

Ninja Professional BL610: Blender won't stay on.

Wed, 12 Mar 2025 06:57:59 -0700

A Ninja BL610 does not stay on regardless of the button that is pressed. Only works for a second, it does the same thing on Low, Med and High, basically it does a pulse then stops.

Nutribullet 1200W: Why all my light is blinking green at the same time.

Mon, 24 Feb 2025 20:34:21 -0700

I recently got Nutri Bullet 1200watt and as soon as I got it i tried to blend smoothie but After 10 seconds the blender stops and all the light on my button started blinking at the same time. I also notice the motor was getting warm. I tried to do it after 15 minutes but same problem. Please help me with this problem. Thank You

⟐ Edited by author February 24, 2025 at 20:34 MST

Bodum Bistro Electric Blender Stick: I lost top cover of blender which have batter terminals

Wed, 19 Feb 2025 14:32:04 -0700

I have a blender in which batteries goes from top in a vertical way . The cover of the top of the blender have the terminal , i lost the cover . So , any way to fix that ?

Ninja Blender: My ninja bl682 blender power base is broken

Mon, 10 Feb 2025 06:55:15 -0700

replace my nutri ninja blender bl682 power base

Vitamix 5200: Why is my blender only running at max speed?

Thu, 16 Jan 2025 15:22:07 -0700

My Vitamix blender is now only running at max speed irrelevant of the dial or buttons pushed. I've never had an issue with it and now apparently it's just out of warranty (convenient) so Vitamix won't assist me.

Ninja NJ600: My NJ600 only runs on HI (3) speed..

Sun, 12 Jan 2025 10:01:54 -0700

Pushing any speed selection, 1, 2 or 3 runs the blender on the highest speed (3) only. Anybody else figured how to fix this. Just using the Pulse for now...