<![CDATA[iFixit - Answers With Device "Beko Dryer"]]> https://www.ifixit.com/Answers/Device/Beko_Dryer?rss=yes en-US Sat, 04 Apr 2026 19:08:18 -0700 <![CDATA[Beko Dryer: tumble dryer drum turnning but no heat]]> i have a beko drvs-62w the drum is turning but there is no heat on any settings all help appreciated wife going mad

⟐ Answer edited September 09, 2024 at 0:55 MST

]]> https://www.ifixit.com/Answers/View/102539/tumble+dryer+drum+turnning+but+no+heat https://www.ifixit.com/Answers/View/102539 Mon, 09 Sep 2024 00:55:56 -0700 <![CDATA[Beko DHR73431W: Why my dryer just spin for 1 minute only...]]> Just want to know how to fix it. It spins only for a minute then the full water symbol pop up ( even there's no water). Help me...thanks

]]> https://www.ifixit.com/Answers/View/811835/Why+my+dryer+just+spin+for+1+minute+only... https://www.ifixit.com/Answers/View/811835 Sun, 03 Sep 2023 06:49:11 -0700 <![CDATA[Beko Dryer: Dryer doesn't turn on, periodic clicking from panel after power outage]]> After a brief power outage, our dryer doesn't function at all (panel is unresponsive, no lights, etc.). There is just a periodic clicking noise coming from the beep speaker on the circuit board. Before the power outage, the dial had been left in an on position, and so I suspect a power surge to the board when the power returned.

I've ruled out an issue with the receptacle and thermal fuse. Power is clearly getting to the board. Inspecting the motor, I don't seem to see a belt switch to test, so I don't believe this model has one. Is there anything else I should assess? Can I somewhat safely assume the issue is with the circuit board?

⟐ Commented August 15, 2025 at 12:16 MST

]]> https://www.ifixit.com/Answers/View/906730/Dryer+doesn't+turn+on,+periodic+clicking+from+panel+after+power+outage https://www.ifixit.com/Answers/View/906730 Fri, 15 Aug 2025 12:16:06 -0700 <![CDATA[Beko Dryer: Drying process interrupted after few minutes]]> Hello everyone,

my tumble dryer stops the process after about 1-2 minutes. If I start the process again (same program, no restart, just activate the program again after it’s finished) it runs as it is programmed, the clothes are dry.

Filter is clean, water tank empty

What could be the rain therefore?

Thanks in advance and BR

Chris

Update (11/25/23)

Hi!

It’s the Beko DS7333 PA0.

⟐ Edited by author November 25, 2023 at 10:13 MST

]]> https://www.ifixit.com/Answers/View/825561/Drying+process+interrupted+after+few+minutes https://www.ifixit.com/Answers/View/825561 Sat, 25 Nov 2023 10:13:30 -0700