⟐ Commented February 14, 2024 at 20:38 MST

⟐ Answer deleted January 23, 2022 at 5:15 MST

⟐ Answered October 17, 2023 at 3:07 MST

1. All five white charging lights and the power button light would pulse following a single red light with the power button light, this sequence would happen three times.
2. Next, a red light would flash three times.
3. After that, a single white light from the charging lights would fade in and out as long as the beats are connected to a power source.

If I try to turn the beats on while connected to the original charging cable the red light would flash three times before the white light continues to fade in and out.

Below is a list of things that I have already attempted.

1. Resetting the beats. The website said to hold down the power button and the volume buttons for 10 seconds. I’ve tried it without the power plugged in and there is no response from the lights. When I try it plugged in the beats would repeat the light sequence in the order on the list above.
2. Updating the firmware. I have downloaded the beats software thing from the site. and plugged the beats in. The beats would show up with the correct name I’ve assigned to it, and the battery percentage would show 0%. It would tell me that the beats are up to date, and give me the option of changing the name of the beats.
3. Letting it charge. I’ve left the beats on my countertop for about four days to charge. the only thing that would happen is the pulsating white light.
4. Plugging in the aux and connecting to a phone. There would be no response from this action whatsoever.

What do you guys think? I guess would be water damage from me sweating, but other than that I don’t know how to go about this situation. Is this possible to fix? (Before anyone says take it to apple that option will be my last resort, probably to buy a new one.) But these beats means a lot to me for personal reasons and I do not want to give up on them.

These are the black and gold beats studio 3 wireless headphones. There is no option for this electronic so I chose Beats studio 2 as the electronic option.

⟐ Commented July 12, 2024 at 12:01 MST

⟐ Commented January 09, 2022 at 20:08 MST

So if I plug in the charger and keep it plugged in and then plug in the Audio cable, the headphones will work as long as both the charger and audio cable remain plugged in.

Another weird thing is if I instead plug in the audio cable first and then the charger, the LED battery indicator light (first light only) will flash quickly and then the LED lights will not flash at all. On top of that the audio will not work either so I have to plug in the charger (keep it plugged in) and then plug in the audio cable, thought that was weird.

Anyhow do you guys know of a possible fix? I'd like to let you know that I have two pairs of Beats Studio 2.0 headphones. One of them has a broken headband and bracket but the audio works fine and then there's this one which has no broken parts besides the battery (idk where the battery would be in the Studio 2.0) I guess? Anyhow any help is appreciated.

⟐ Commented January 04, 2021 at 10:12 MST

They're nearly a year old. I used them this morning and they were fine. Help please?

⟐ Answered October 12, 2017 at 8:38 MST

Hi Guys, My Beats Studio 2.0 headset developed a crack through the left outer + left inner cover (area marked in image above). Could you please let me know where can I find replacement parts for the same? Thanks!

⟐ Commented September 28, 2016 at 20:52 MST

⟐ Commented February 27, 2020 at 17:46 MST

⟐ Answered February 07, 2018 at 23:06 MST

By simply pressing the power button or plugging/unplugging the headphone wire, it blinks a red LED 3 times, although this does not always happen.

The battery voltage is rated at 3.7v and is supplying over 4v at full charge (which is normal/healthy) - this is how I'm sure it's not a battery issue.

The length of time "working normally" before re-freezing seems to be larger when the headphones have not been used in a while... this may be a hint as to which part of the circuitry is malfunctioning

Apple (who owns Beats) quoted me on a repair for $215 CAD which seems high. I'm hoping that someone who has some circuit board repair/diagnostic skills will be able to solve this problem which seems to be plaguing many others.

Hi-res circuit board layout is available if the attached images end up getting scaled down. I'm not great at reading circuit boards, but it looks like there's likely more circuitry in the other side

⟐ Commented January 11, 2020 at 8:44 MST

⟐ Answer accepted December 27, 2017 at 8:27 MST

⟐ Commented March 21, 2020 at 17:03 MST

I've tried those reseting formulas, they do reset but after i've done that, it's the same problem. Very strange problem but please help!

⟐ Commented November 29, 2017 at 7:15 MST

The string of charging lights on my Beats Studio3 headphones never indicates that charging is complete, the final light in the sequence will continue to flash perpetually (I tested by leaving them charging for 24 hours). Also, when connect to my phone after an extremely long charging sequence, the battery will indicate that it is 97-99% full, and never reaches 100%. I have gone through 2 pairs with the same issue in the past 2 weeks. I have performed a reset on both headphones numerous times to no avail. Any ideas?

⟐ Commented October 10, 2021 at 8:11 MST

⟐ Answered December 12, 2020 at 21:23 MST

⟐ Commented November 18, 2017 at 10:42 MST

Don't remember if I ran into any issues.

But now, the updater won't recognize them - beats studio wireless titanium.

Tried a pair of powerbeats 2 and they wer recognised just fine, using the same cable.

Mac osx, tried safari and chrome. Also tried a windows 10 machine but no luck.

Pretty sure the headphones are the real deal, as they've been purchased from an authorized reseller.

Any ideas? Thanks!

Oh, the headphones are working just fine; just like to be on the latest firmware version.

And I'm based in Romania, so don't know if location could be an issue. Tried through vpn too, though.

⟐ Answered March 01, 2017 at 16:04 MST