⟐ Commented September 24, 2024 at 18:36 MST

If the beats are being charge and i pair my iPhone it works and everything,but if I unplugged them from the charger it wont even turn on the Bluetooth

⟐ Commented January 26, 2023 at 1:49 MST

⟐ Commented February 28, 2023 at 9:18 MST

I have tried resetting them and all combinations of holding power and volume buttons for both 10 seconds and 120 seconds and now change. I have ensured my firmware is up to date and replaced the battery but no joy.

Any ideas?

⟐ Commented December 11, 2022 at 11:15 MST

⟐ Edited December 29, 2016 at 22:19 MST

tried to make a reset with no hope.

when pressing the Bluetooth button, nothing appears in the light bar or even in my iphone to detect the unit.

Recently, my laptop didnt see the headset

please, help with information on how to get the Bluetooth faulty unit to replace it

⟐ Answer accepted March 06, 2017 at 9:48 MST

⟐ Commented February 28, 2023 at 9:44 MST

⟐ Commented April 17, 2022 at 8:39 MST

Also specific wattage an type to be sure I obtain correct replacement.

⟐ Answered December 14, 2017 at 8:46 MST

⟐ Commented February 01, 2021 at 8:06 MST

I found these beats in the trash at school with electronics exposed. Looked like a mess and it looked old af (like the muffs were worn out and you can see the sponge underneath the leather). There was no liquid or food in said trash can so I took it and put it back together. Every connector was plugged back in its place and it started working again.

Problems that started occurring and some failed solutions:

After about 2 weeks, I was walking home when my beats suddenly just died. I couldn't turn it back on or do anything. I assumed it was dead but when I got back home to charge it, it flashed white and red 3 times (like it was resetting) then had 4 LEDs on, which meant that the battery was about 80% charged. I took it off the charger and then the LEDs immediately turned off. It didn't turn off slowly like it did before. Noticing that it was weird for doing that, I tried turning it on but this time it went white and red again but this time it turned off in the middle of that. After doing it many many times I gave up and left it on the charger. I came back the next day to see if it would work again but it did the same thing (red and white then turn off in the middle of it). Mad, I went online to search for some answers. I've tried the power button middle button combo for 10sec, 20sec, 30sec, 1min, and 3min hold. Done the power button vol. down button for 10sec, 20sec, 30sec, 1min and 3min hold. I tried disconnecting and reconnecting the connecters on the left and right side of the headphones. I disconnected the battery and reconnected it. Nothing….worked. I then decided all was lost and just used wired (aux). After another 3 weeks ive decided that maybe a new battery will make it work again. So that's what I did. With my new battery, I plugged it in, and the beats flashed red and white then turned off in the middle of it again. Thinking to myself that I may be screwed, I tried turning it on. Won't turn on. No lights no nothing. Now when I try to charge it, it stays stuck on the first white LED flashing. I leave it alone for the next 2 hours and it hasn't gained any more LEDs. Tried the whole holding buttons thing again and still nothing. Then I remembered that it may need to be updated, so I went to the computer (windows) downloaded and installed the updater. When I plugged in my beats (with battery connected) windows wouldn't recognize my device and so did the updater. I took off the battery, and it was the same thing.

An interesting but weird and terrible solution…

Taking out the battery but plugging in the charger will make the LEDs flash red and white 3 times then will make it work again (yes Bluetooth too).

I don't want to have a battery pack glued onto my headphones to make it work. Is there anything I can do to make it work again? Is it a motherboard problem or a short? I want to fix it but I don't know where to start. Preferably I want to fix it at home before I go to a store.

Much love thx

My studio 2 wireless does the reset process and flashes the lights fine but on the side of the wireless led it doen't com on or blink. I not able to pair the headset on my iPhone it doen't event show the headset on the list. Using the P2 cable it works fine.

Thx.

⟐ Marked as duplicate January 02, 2018 at 3:07 MST

The smell seems to be coming from where the speakers themselves are, so I'm really at a loss... It's nothing I can see, there's no discoloration, so it must have been some sort of liquid but everything seems to still be okay aside from their new smell.

(Think REALLY bad cologne)

Any suggestions/instructions?

⟐ Answered March 09, 2024 at 12:03 MST

⟐ Commented April 03, 2024 at 10:19 MST

I’ve had this pair for a couple years now, so when I started to notice the symptom of a charge not lasting as long as it once did, I immediately suspected the battery and replaced it. Now, with a fresh battery, I’ll charge it and still only get ~5 hours worth of use, because the battery will even drain while it is off.

I’ve also tried resetting them after I replaced the battery. Still no luck there. Anybody have a solution? Is it time to replace them?

⟐ Commented April 27, 2022 at 8:35 MST

⟐ Answered May 20, 2023 at 9:54 MST

⟐ Answered June 04, 2019 at 4:54 MST

thanks

⟐ Answered March 01, 2019 at 9:38 MST

⟐ Answered June 21, 2018 at 17:01 MST