<![CDATA[iFixit - Answers With Device "Audio-Technica AT-LP60XUSB"]]> https://www.ifixit.com/Answers/Device/Audio-Technica_AT-LP60XUSB?rss=yes en-US Sat, 04 Apr 2026 22:57:07 -0700 <![CDATA[Audio-Technica AT-LP60XUSB: Start button is not doing anything]]> The belt is on correctly, and the manual reset did not help. The start button does nothing; almost as if there’s no power.

⟐ Commented January 27, 2024 at 18:53 MST

]]> https://www.ifixit.com/Answers/View/803028/Start+button+is+not+doing+anything https://www.ifixit.com/Answers/View/803028 Sat, 27 Jan 2024 18:53:49 -0700 <![CDATA[Audio-Technica AT-LP60XUSB: brand new, never run before]]> I am having the exact same issue. This is a unit that was left, along with other AV equipment when I bought the house. It had never had the belt engaged over the drive pully (red ribbon still attached). I attached the pully, made sure it was right, and made the turns on the turntable. I get the mechanical click when i press the start button, but that is the only action. Repeated the rotating reset several times with only the click resulting. Again, brand new, never run before. Any ideas?

Update (01/27/24)

Another YT vide showed how to manually reset but that did nothing. With no turntable or belt on, I can make the drive pully spin if I give it a little "push". However can also stop it with very little pressure. Once the belt is engaged, no amount of spinning the turntable will start things. So, I have power, and the motor is not dead, but seems to lack any power. Again, this is a never used AT-LP60. About to chunk it.

⟐ Edited by author January 28, 2024 at 13:10 MST

]]> https://www.ifixit.com/Answers/View/834123/brand+new,+never+run+before https://www.ifixit.com/Answers/View/834123 Sun, 28 Jan 2024 13:10:56 -0700