⟐ Answered June 22, 2025 at 16:05 MST

⟐ Commented December 22, 2023 at 4:05 MST

⟐ Answered August 12, 2025 at 3:33 MST

⟐ Answered April 03, 2026 at 7:32 MST

& now the problem is when i Put the power plug in , the laptop turns on automatically (Without pressing the power button) …..

and once it turns on…after some seconds it restarts automatically….but in the second boot the OS (Windows10) load up…..

So what do you think? (i removed the battery because it wasn’t working, i mean at 80% laptop turns off by itself)

also in battery Icon of Windows it says that (255% available pluged in)!!!!!

→****CHECK THIS SCREENSHOT OUT****←

⟐ Answered January 31, 2021 at 2:12 MST

⟐ Answer edited April 14, 2020 at 5:11 MST

I used an external keyboard and it work properly.

the damage is only in the keyboard not the mother board.

I need a replacement to my keyboard with reasonable price.

Thanks

⟐ Answered November 26, 2016 at 11:42 MST

⟐ Answered March 06, 2015 at 17:11 MST

My Asus laptop is stuck in a loop of only starting in BIOS Aptio setup utility. It's is 2019 version. Many fixes online talk about changing CSM in boot or security menu but I don't have that option

⟐ Commented November 11, 2024 at 7:40 MST

⟐ Answered August 29, 2024 at 4:13 MST

I ordered a new battery from ifixit and installed it in my laptop, but it isn't charging it stuck at 1%.

Any one know what's the exact issue make sure to reply.

Any fast replies will be appreciated.

Thank you.

⟐ Answered June 11, 2024 at 8:33 MST

⟐ Commented March 27, 2024 at 18:53 MST

Sorry to take your time but i have a problem with my N552vw…I have used it for about 3 years (Better to say only for gaming)….before i was playing Fortnite in 4K resolution & low graphic settings & my FPS was around 80-100 (In season 9) but after season 10 my fps was around 40-60 (With the same graphic settings that i played before) & now it’s still in that situation ….& now because of that i have only changed the resolution into FullHD & now i get 120 fps…..(Also i Updated Nivida graphic driver but nothing has happened) so my question is like this…

Is it possibile for CPU/GPU to be *half burnt*? (I mean someparts of cpu/gpu works but the rest of them not!)…..

is it possible?

i also changed the powermode into bestperformance but it didn’t work….

(Also it’s battery doesn’t work….do you think i should remove it?)

i know that the refresh rate of it’s screen is 60Hz…so i think it’s wrong to have more fps than 60…isn’t it?

sorry my english is bad….

⟐ Commented September 23, 2020 at 13:39 MST

I would like to upgrade from HDD to an SSD but considering the price I wouldn’t mind a smaller drive but I have a doubt concerning the cloning from 1To to 500Go, is it possible ? considering I only have 70Go of data on the 1To drive.

Thanks in advance,

PS: sorry for mistakes, french here.

⟐ Answered January 04, 2020 at 6:32 MST

⟐ Answer accepted May 16, 2016 at 4:49 MST

⟐ Answer accepted July 25, 2021 at 18:25 MST

The problem started with random BSOD with random error codes.

Then last time the screen turned off without warning with fan still running. I turned it off by holding power button for a few seconds.

Now it won't turn on at all, but power light is on, and battery light blinking all the time.

How do I start fixing it/figuring out what's wrong with my laptop?

Edit: battery light still blinks even when it's plugged in

⟐ Commented March 21, 2025 at 8:22 MST

I have a ‘ASUS E203NA’ and it has an SSD with 28GB of free storage. You can clearly see where is the problem here. Since it has Windows installed, 20GB is already consumed by the OS leaving me with practically nothing.

I’m wondering if it can be upgraded with a bigger SSD and if it can be, could somebody please link me a compatible SSD?

Thanks!!

⟐ Answered June 06, 2024 at 12:07 MST

⟐ Commented June 04, 2023 at 21:57 MST

I have an Asus R416S laptop on which there is zero information on the internet.

It was working super slow, so I decided to format the SSD (https://www.partitionwizard.com/partitio...) and have a clean Windows 10 installation.

After formatting the SSD, wh.en selecting the hard drive, windows shows an error: (https://www.partitionwizard.com/partitio...)

Alright. I go into BIOS but under BOOT, the SSD doesn't show up. I can only see my bootable Windows USB which is set to Boot Priority #1.

If the SSD is disabled, I can't enable the drive because the bios is SO bare bones that I can't Change SATA Controller Mode as there is no option like that in the BIOS. Resetting the BIOS to default of optimised settings also didn't make the SSD appear.

I created a portable windows installation on an USB and booting windows through the USB, I can see the SSD in Windows. I can copy to it and open whatever I have copied on it.

I thought it might be a firmware problem.. Downloaded new and old SanDisk SSD tools and the SSD Dashboard but those didn't recognize the SSD.

At this point I am stumped. Does anyone have any ideas what could I do?

⟐ Answer deleted November 20, 2020 at 10:38 MST