My AirPort Extreme started restarting itself repeatedly so I disconnected it from the power supply for A few minutes and then plugged it back again.

Since then the unit Ethernet ports are blinking green but the station main front light remain off.

What can I do? How do I make it work again?

Thanks,

Tal

⟐ Commented October 22, 2018 at 8:59 MST

⟐ Answer edited July 02, 2019 at 5:12 MST

I recently updated my AEB to 7.4.2 and it turns out that my MacBook is not able to connect to the Harddrive connected to the AEB. When 7.4.1 was installed (and after downgrading Firmware to 7.4.1) it worked and I could even use it for Backups with TimeMachine.

It's a used AEB, bought on Amazon a year ago, or so. That's why I don't know when it was built etc. But the Model No. is A1143, if this helps.

Would be thankful for any advices.

greets [m]

⟐ Edited December 03, 2013 at 13:22 MST

⟐ Answer edited November 09, 2018 at 7:14 MST

Need help with Identify of burned IC U1600 on Apple Airport Extreme A1143 MB053LL/A main board 820-2214-A

Help please!

Just need a Hi resolution picture of U1600 area on main board to identify IC.

Thank you in advance!

Here is pictures to understand what I'm looking for -

⟐ Answered February 09, 2018 at 10:07 MST

⟐ Edited December 09, 2013 at 11:02 MST

Is it possible to replace the card without replacing the logic board? The iFixit teardown suggests not, but I'm hoping there is a solution.

Thanks in advance.

⟐ Edited December 03, 2013 at 13:21 MST

is it possible to upgrade the wifi card to something faster?

⟐ Answer accepted February 01, 2017 at 10:22 MST

However if I connect the MR1100 to a unmanaged switch like an 8 port D-Link and then connect the D-Link to the A1143 on the wan port, the A1143 is then able to obtain an IP address.

Why is this. Our remote fire stations are changing out from the Cradle point ibr650-150m’s to the netgear MR1100 units because they provide more throughput speed.

We were able to connect the A1143 directly to the Cradle point with no issues.

⟐ Answered January 12, 2021 at 11:51 MST

Why is the indicator on the AirPort Extreme Base Station off?

Today, January 1, 2020 on the AirPort Extreme Base Station (model A1143), the indicator turned off and Wi-Fi does not work. At the same time, the inside of the router is audible, as if the clock hands are ticking. We were able to update the router. But at the same time, the indicator on the device did not light up. What to do next is unclear.

⟐ Answered January 01, 2020 at 6:00 MST

The green status light on the front of my 2007 Airport Extreme (I'm not sure of the model; the date is from inside components - antenna?) does not come on. The AC adapter was plugged into a surge protector, but when our electricity came back on after a nearby storm knocked out electricity in the area, the Airport Extreme was not functioning.

I listened to the adapter while the green LEDs at the ethernet ports blinked. The adapter chirped every time the lights blinked.

In November, I bought a new Apple Airport Extreme Model A1521 because I was anticipating a new Mac Pro in the near future.

So a replacement AC adapter should solve the problem of this not coming on due to insufficient power?

⟐ Edited April 02, 2017 at 11:22 MST