iFixit - Active Questions With Device "Anesthesia System"

Mindray A5: Lithium backup battery location

Fri, 29 Aug 2025 19:20:25 -0700

Where exactly is the battery located?

⟐ Answered August 29, 2025 at 19:20 MST

Riken Keiki FI-21 Anesthesia: Pump not working well

Mon, 25 Aug 2025 21:52:59 -0700

Pump is not working, the pump is too low to working

Draeger AV1 Ventilator: Why is my ventilator not functioning

Sun, 16 Feb 2025 02:03:44 -0700

After turning on the power, an error code appears on screen saying “Failure: 0769.32927” Please call draeger service.

What could be the possible fault and solution?

Drager Primus: We have a big problem that is show in screen error message "Gas sensor

Sat, 23 Nov 2024 07:48:18 -0700

I want the solving for this problem

⟐ Commented November 23, 2024 at 7:48 MST

Drager Primus: fault in self test step 98%

Tue, 08 Oct 2024 16:16:00 -0700

Could any one help me please

Penlon OMV 50: Arrow on OMV lid-? wrong direction

Thu, 14 Mar 2024 10:24:41 -0700

A quick question about this OMV- the arrow on the lid, above the "To Patient" sign on the body points to the left, which I think is the inlet valve.

Is that the correct alignment, or is something wrong with this?

The device is not in clinical use...

⟐ Commented March 14, 2024 at 10:24 MST

Drager Julian: Problem in sel test error 36

Tue, 12 Mar 2024 19:50:24 -0700

ma:0. 00128. sy:0. 0 0 16

⟐ Commented March 12, 2024 at 19:50 MST

Datex-Ohmeda Aisys: moisture in gas machine and mould in flow sensor

Sat, 28 Oct 2023 13:56:43 -0700

Our datex ohmeda gas machines have alot of rainout in the circuits. In addition this week we discovered mold on the flow sensor cartridge. What can be causing this much moisture in our units. Please advise.

Drager Julian: System Startup Self-Test 28 error

Sun, 03 Sep 2023 12:11:16 -0700

Hello.

One of our clinics employs NDA Julian from Drager - 2000 release.

During the self test, it gives an error code - SV: 0 0 128 0

What is the problem in the pressure sensors or in the PEEP valve?

Mindray A7: Auto Ventilation Leakage Test Failed

Sun, 30 Jul 2023 00:20:21 -0700

I have a problem with A8 Mindray Anesthesia Machine as the following:

when the stuff doing the test every morning the first result is failed (Red Screen) after checked all cables and connections .. etc., and redo the test the result is failed (Yellow Screen).

The stuff starts the operation with the yellow warning, after first operation the stuff redo the test result is pass and the device works normally rest of the day.

The only way to change the leakage test result from yellow warning (failed) to pass is when we start auto ventilation for a short time then redo the test again. After the first pass result the problem solved and we repeated the test more than one time and the test result is pass.

When we leave the device for the next day and redo the test in the morning the problem happens again (yellow warning).

Drager Narkomed 2B: Narkomed 2-B switch availability

Mon, 13 Feb 2023 07:21:06 -0700

Looking for on/off switch for Narkomed 2B. Anyone have that part? Price? Availability - possible leads for that partoart.

⟐ Answered February 13, 2023 at 7:21 MST

Omnicell Anesthesia Workstation: Generic ttl outputs for the drawers and bins

Fri, 03 Feb 2023 13:20:21 -0700

Can I use a generic device to operate the drawer locks and bins, without going through the proprietary software? I purchased a surplused G4,

I am using the G4 as a hardware container!

⟐ Answer edited February 03, 2023 at 13:20 MST

Drager Anesthesia: message on the screen indicating Leak/Compliance test failed

Sat, 19 Mar 2022 17:36:52 -0700

Dragger Anesthesia mc Fabius plus issue

Sir, I am facing a problem with a anesthesia machine mentioned above. Like there is a message on the screen indicating Leak/Compliance test failed.

Advise me how do I solve the issue.

⟐ Edited March 19, 2022 at 17:36 MST

Drager Apollo: The display screen scrolls during self test and never stops.

Fri, 10 Dec 2021 16:46:09 -0700

On startup the Dragger Apollo display screen comes up a bluish green and then printed text comes up and just scrolls. any suggestions? Not cabling.

Siemens Kion: I need the operations manual for Siemens kion anesthesia machine

Fri, 02 Jul 2021 12:38:10 -0700

I need the operations manual for Siemens kion anesthesia machine

⟐ Commented July 02, 2021 at 12:38 MST

Draeger AV1 Ventilator: agen bola terpercaya di indonesia

Sun, 30 Aug 2020 04:18:11 -0700

Clickbet88 merupakan agen bola terpercaya di indonesia dengan berjenis-jenis permainan judi online. Kecuali itu, kami diandalkan juga sebagai agen sbobet88 terpercaya. Dengan pengalaman lebih dari 3 tahun di industri ini, membikin kami mengerti betul apa yang sepatutnya di miliki sebuah judi bola online. Salah satu fitur keunggulan Clickbet888 adalah pelaksanaan kencang dengan pelayanan yang sopan.