iFixit - Answers With Device "Amana Washing Machine NTW4516FW"

Amana Washing Machine NTW4516FW: Amana NTW4516FW Washer does not advance to rinse cycle

Sat, 06 Sep 2025 13:56:57 -0700

The washer fills, agitates, and spins. Then it thinks it is done and shuts off. The washer needs to be set to a manual rinse cycle after washing. It also seems to have issues with auto sense. Water level seems deeper than necessary, so that washing small loads is not water efficient.

⟐ Commented September 06, 2025 at 13:56 MST

Amana Washing Machine NTW4516FW: Not finishing the wash drain rinse

Thu, 07 Dec 2023 02:26:10 -0700

My washer when I start it will start to run water then stops and shuts off. If I leave it it will continue after being shut off but never drains?

⟐ Answered December 07, 2023 at 2:26 MST

Amana Washing Machine NTW4516FW: Clicking noise during wash cycle

Mon, 01 Dec 2025 00:30:34 -0700

my washer was making a grinding noise so I recently put a new splutch kit on. Now its making a clicking noise during wash cycle.

⟐ Commented December 01, 2025 at 0:30 MST

Amana Washing Machine NTW4516FW: Unit doesn't fill with cold water and will not advance to spin cycle

Thu, 21 Nov 2024 01:09:11 -0700

My washer will not fill all the way and time out if I use anything other than the "warm" option for water temperature. Everytime I check on a load the clothes will be wet and the light will be on rinse.

⟐ Answer edited November 21, 2024 at 1:09 MST

Amana Washing Machine NTW4516FW: Lid lock will not unlock

Fri, 10 Nov 2023 10:45:25 -0700

The lid lock on my washer was broken and would not lock. I replaced it. When I lowered the lid while reassembling it locked and now will not unlock. I have been on YouTube and tried self test, diagnostic( no error shows) The light may be on or off but does not unlock? Any more ideas? I took it back apart once to confirm it was installed correctly. Manually unlocked it, but when I reassemble again the lid locks automatically as though it has to do with positioning??

Thanks, Katie

Amana Washing Machine NTW4516FW: Washer will not continue to ANY cycle

Wed, 05 Jul 2023 09:42:23 -0700

I am just searching for a little confirmation on my troubleshooting before I go and spend $200 for a timer. The machine will fill, drain, and spin correctly within any given cycle but it will not continue into the next cycle regardless of what it is.

Could there be another possible cause of this problem that I could test?