<![CDATA[iFixit - Answers With Device "Alpine Car Audio"]]> https://www.ifixit.com/Answers/Device/Alpine_Car_Audio?rss=yes en-US Fri, 03 Apr 2026 11:42:07 -0700 <![CDATA[Alpine MRV-M500: No sound coming from amp]]> The amp Powers up but I get no sound when I hook up speakers. I've tried several speakers. So it's definitely something to do with the amp. Blown channel? Can it be fixed and if so around how much for the repair?

⟐ Answered June 18, 2019 at 13:19 MST

]]> https://www.ifixit.com/Answers/View/557813/No+sound+coming+from+amp https://www.ifixit.com/Answers/View/557813 Tue, 18 Jun 2019 13:19:48 -0700 <![CDATA[Alpine iLX-500: Why sound is weak]]> At high level sound is very low

⟐ Answered September 03, 2025 at 8:22 MST

]]> https://www.ifixit.com/Answers/View/855985/Why+sound+is+weak https://www.ifixit.com/Answers/View/855985 Wed, 03 Sep 2025 08:22:54 -0700 <![CDATA[Alpine MRV-M500: What is the diode size in a alpine mrv-m500 motherboard slot c9002]]> trying to find out the diode size in a alpine mrv-m500 motherboard stot c9002 so i can replace it

⟐ Answered April 04, 2020 at 8:35 MST

]]> https://www.ifixit.com/Answers/View/626166/What+is+the+diode+size+in+a+alpine+mrv-m500+motherboard+slot+c9002 https://www.ifixit.com/Answers/View/626166 Sat, 04 Apr 2020 08:35:05 -0700 <![CDATA[Alpine CDE-W265bt Head Unit: How should I reattach these mounting/ground pads?]]> The USB ground/mounting sheath broke loose tonight when my phone fell off the seat while I was turning and tugged on it. I figured it would be an easy fix, but since this was $250 or so, I wanted to be sure I'd get it right. How does one go about fixing something like this that needs to hold up to abuse? The middle piece was a bit loose also, but I already touched up the soldering on those points. As soon as the solder on the 3 large pins melted, they lifted up on all but one trace connection on just one side of each pin. It still probably functions, but I'm not sure if it would hold up for long. I'm not too worried that it couldn't get enough current, since it is only a 5-10 watt usb port @12 volts, so only 1/3 amp or so would be going to each pin. Should I use a cut off chunk of paperclip and solder it sideways across each pad and also joining the usb pin in the middle? Then maybe finish with hot glue?

Block Image
Block Image
Block Image

⟐ Commented December 19, 2019 at 3:20 MST

]]> https://www.ifixit.com/Answers/View/471926/How+should+I+reattach+these+mounting-ground+pads https://www.ifixit.com/Answers/View/471926 Thu, 19 Dec 2019 03:20:08 -0700 <![CDATA[Alpine CDE-W265bt Head Unit: Myvi icon radio player no sound but display on]]> Hi, I use myvi icone se modal my radio no sound but radio display on all functions its good but no sound

]]> https://www.ifixit.com/Answers/View/681542/Myvi+icon+radio+player+no+sound+but+display+on https://www.ifixit.com/Answers/View/681542 Sat, 20 Feb 2021 18:04:41 -0700