iFixit - Answers With Device "Airsoft Gun"

Airsoft Gun: Bb get stuck in a bb gun

Sun, 14 Jul 2024 16:23:40 -0700

There is a bb stuck in the barrel of my bb gun

what do i need to do now?

⟐ Commented July 14, 2024 at 16:23 MST

GG Xtreme45: Why did my front silver peice pop out

Sat, 15 Jun 2024 13:50:22 -0700

why is my front silver piece popping out

Balystik SMR200 HPA Regulator: Depressurise regulator after game day

Thu, 29 Feb 2024 09:25:59 -0700

Almost all videos on HPA as a whole, indicate that I should be purging my SMR 200 of the air left in it. However when I’ve look up online it seems most people have an easy way to leave the regulator screwed fully on while turning the pressure off. I can’t seem to find a similar feature with this regulator, as lowing the pressure with the screw seems to cause my line hookup side to leek air once I get down below 40psi. For now I’ve been unscrewing the regulator form the bottle then purging it with the line, obviously that works but it doesn’t seem like I’m meant to be screwing and unscrewing the regulator everytime I want to play.

Maybe I’m missing something?

Airsoft Gun: How do I fix my connector for my valken tactical m4?

Thu, 16 Nov 2023 21:20:27 -0700

So, you know the wires that come out of an AEG? You know how they feed into a connector which plugs into a battery? Well, the wires were not staying in so i superglued them, but superglue doesnt conduct electricity. So now my gun is shot until I fix this. I cannot get the glue out of the connector. How do I fix this? And, how do i safely connect the AEG wires to the connector?

⟐ Answered November 16, 2023 at 21:20 MST

GG Combat Machine 16 Carbine: Where can I get a battery cover for my raider-L?

Thu, 16 Nov 2023 21:18:55 -0700

I cant seem to find a replacement cover for my G&G cm16 Raider-L tan

⟐ Answered November 16, 2023 at 21:18 MST

Airsoft Gun: How do I dissasemble a Magnum Research Inc. Baby Desert Eagle Co2

Wed, 07 Sep 2022 21:32:28 -0700

So the barrel on my Magnum Research Inc. Baby Desert Eagle Co2 Non-Blowback Full Metal Pistol fell out of place and i cant seem to fix it without dissasebling it.There is also a bullet stuck inside the barrel.Now does any one know what to do?

⟐ Commented September 07, 2022 at 21:32 MST

GG TR16 R4: Is this the same Gun as the G&G Choine Gr16?

Wed, 27 Apr 2022 07:37:44 -0700

Is this the same gun as the G&G Choine Gr16?

⟐ Answered April 27, 2022 at 7:37 MST

GG TR16 R4: Front Iron Sight Removal

Wed, 27 Apr 2022 07:34:54 -0700

Hi,

I need to remove my front iron sight. To do that I need to remove my muzzle first. How Do I do that? I cant figure it out.

Thank You for your help,

Jaro

⟐ Answered April 27, 2022 at 7:34 MST

Airsoft Gun: I need to reassemble the gear box

Fri, 31 Jul 2020 16:40:49 -0700

Gear placement. Need to know proper gearbox reassemble

Airsoft Gun: Why is my gun stuck in full out with out even pulling the trigger

Mon, 13 Jul 2020 18:57:26 -0700

Why is my gun stuck in full out with out even pulling the trigger?

GG Xtreme45: Why arent my bbs not shooting? rolling out barrel

Fri, 08 May 2020 21:01:20 -0700

i have done everything right when loading my bb gun. i have the same exact one from academy. when i shot it the bb just rolled out of the barrel instead of actually shooting. whats the problem? is it because my bb’s are copper and not silver? and also when i tightened my CO2 it got very cold and hissed out cold air. i need advice asap on why its not shooting and why the co2 cartridge got very cold when trying to install it!!!!

Airsoft Gun: Broken plastic in magazine release area

Sat, 22 Feb 2020 15:48:40 -0700

it wont close cuz i accidentally stepped on it and i dont know what to do, the magazine will slide out without pressing the mab release button, my bb gun is a MP5 SD3

GG Combat Machine 16 Carbine: Where can I buy the parts

Thu, 13 Feb 2020 16:27:39 -0700

where can i get the hop-up and inner barrel

GG Combat Machine 16 Carbine: Motor straining while firing

Wed, 13 Feb 2019 09:17:25 -0700

I have this exact rifle. It has the blow back feel to it as well.

Lately while trying to fire it, it sounds as if the motor is straining, it fires intermittently and freezes. The batteries are fine and i have occasionally put a drop of silicone lube on a few BB's.

Before i use the guide to take it apart, i would like to know if there is anything specific i need to be aware of or if there are any known issues with the rifle which could be causing this.

⟐ Commented February 13, 2019 at 9:17 MST

GG Combat Machine 16 Carbine: Why is my air gun shooting to the left?

Wed, 23 Jan 2019 12:32:48 -0700

air gun shoots left, I've cleaned the barrel, taken the hop up apart, adjusted the sights, nothing seems to work

Airsoft Gun: My stinger p311 is getting harder to reload

Sun, 28 Jan 2018 08:19:40 -0700

My p311 stinger Crossman is getting harder to reload it was working fine and suddenly got hard to reload

⟐ Answered January 28, 2018 at 8:19 MST

Airsoft Gun: Gas is leaking, Trigger stuck

Mon, 27 Nov 2017 14:58:00 -0700

Took apart my Colt Python .357 like a dumb dumb, now the gas chamber is leaking somewhere, somehow and the trigger is getting stuck every time I try to put it back together.

SG 552-1 Commando: looking for replacement parts for commando sg 552-1

Fri, 26 Jun 2015 14:23:09 -0700

Looked all over the web and can not seem to find any replacement parts for commando sg 552-1

The folding stock where it clips to the gun is broke and broken clip is missing. Any help would be appreciated