iFixit - Answers With Device "Air Fryer"

BELLA TXG-DS14: Screws that attach handle to basket don’t grip anymore.Need replacemen

Wed, 25 Mar 2026 15:11:54 -0700

My Bella 2.6qt air fryer screws that attach handle to basket don’t grip .

Please help.

⟐ Commented March 25, 2026 at 15:11 MST

Tefal Actifry: Heating Element not turning on, fuses appear good (EDIT from NOT good)

Wed, 25 Mar 2026 14:12:35 -0700

I've read the other question about the heating element though it was solved with a fuse replacement rather than a heating element replacement. A preliminary test across two of the visible fuses showed continuity across both although the one with the clear glass tube showed no visible signs of being blown. I couldn't see under the white covering of the larger one.
(EDIT: My bad, fuses with continuity imply good fuses as point out by commenter Jayeff - thank you)

Would suspect heating element as a possibility. More details in my comment on Jayeffs answer below.

Are there any skilled hobbyists who can advise on more in depth troubleshooting?

If I solve my problem I have pledged to making a disassembly guide for the T-fal Actifry but at this point I'm just ready to give up on the repair.

⟐ Commented March 25, 2026 at 14:12 MST

Air Fryer: Fan not operating on Bella trizone

Mon, 16 Mar 2026 19:18:31 -0700

Bella pro trizone

This air fryer model has two compartments. The left side fan doesn’t turn on. Any idea what the likely fix is? I hate to tear apart if it’s a part I can’t replace anyway. Do I remove bottom screws or does top come off?

⟐ Edited March 16, 2026 at 19:18 MST

Cosori Pro II: won't stay on when basket I pushed in

Sat, 14 Mar 2026 15:23:04 -0700

when basket is pushed in light flickers on. then goes off

⟐ Commented March 14, 2026 at 15:23 MST

Ninja Foodi SP101: Need the fans model numbers

Sun, 01 Mar 2026 11:43:31 -0700

What are the model number of the fans in this unit? Are they available online?

Air Fryer: Why is my element not working

Wed, 21 Jan 2026 19:25:48 -0700

Why is my element not working

⟐ Commented January 21, 2026 at 19:25 MST

Ninja AF100: The fan is not working

Sat, 03 Jan 2026 14:56:06 -0700

First, it was making a loud noise. Next, the fan stopped working. How do I replace the fan? Part number?

Air Fryer: Instant Vortex Air Fryer's power turns on briefly, then goes off

Fri, 31 Oct 2025 07:37:04 -0700

Hi all. I'm attempting my first appliance repair with my Instant Vortex air fryer, and before I go taking it apart I was hoping to get some advice on how to logically diagnose and approach the problem.

The Problem

Upon plugging the air fryer into a household outlet, the display will beep and briefly turn on before displaying the message 'OFF', and then turning off completely and rendering the appliance unusable. Below is a video demonstrating the behavior.

Any suggestions on how to approach this problem would be greatly appreciated. I'm a total repair noob, so really appreciate the help!

Ben

⟐ Commented October 31, 2025 at 7:37 MST

Gourmia GAF536: No power display on panel board.

Wed, 22 Oct 2025 00:14:18 -0700

No power in panel board even plug in power source.

⟐ Answered October 22, 2025 at 0:14 MST

Philips HD9252 Repair: Anyone tried to clean this device?

Sun, 19 Oct 2025 13:38:44 -0700

This machine seems very difficult to clean. Needs full disassemble, and can be risky since short cables and angles included. Anyone tried to clean? I own one and I'm looking for a little guidance. :)

⟐ Commented October 19, 2025 at 13:38 MST

Ninja Air Fryer: I need help identifying two resistors on the main board for air fryer

Thu, 16 Oct 2025 08:08:50 -0700

Hi,

I am trying to repair my Ninja Speedi ON400UK. I found two resistors melted along with the IC at the back of the main PCB board. (I have managed to identify the IC, which is PN603H, but the resistors are completely unreadable - they are marked as R26 & R227 on the picture).

Does anyone have the same model or has repaired one in the past and can help me with the values of these two SMD resistors, please (share a photo ideally)?

The main PCB board is located behind the cover with the clips, so I needed to remove two screws at the bottom, squeeze it on both sides and pull it to remove the plastic cover and get to the PCB board.

I will be grateful for any kind of help.

⟐ Edited October 16, 2025 at 8:08 MST

Tefal Actifry: T-Fal YV960151 ActiFry 2 in 1 no power; no lcd

Mon, 13 Oct 2025 09:13:20 -0700

Suddenly my Actifry died; first the control panel was working, but was not working for more than 15 sec. Next day no power at all. Obvious nothing wrong with the power source or the cord or the switch. I've read some models has a battery below the LCD. Not sure if this model has one. No strange noises or trays misalignment.

Air Fryer: Como consertar air fryer

Sun, 14 Sep 2025 08:23:10 -0700

Air fryer funciona mas nao esquenta. Como resolver?

⟐ Edited September 14, 2025 at 8:23 MST

Tefal Actifry: Actifry tefal error 6

Sat, 23 Aug 2025 02:29:50 -0700

I get error 6 after few minutes.

The problem was on the electric circuit .

I have replaced the capacitors and the problem has been resolved!!!!

⟐ Commented August 23, 2025 at 2:29 MST

Air Fryer: How to fix weird noise, possible fan noise when airfryer is in use?

Sat, 19 Jul 2025 09:34:07 -0700

Theres a weird noise that sounds like the fan rotor is running dry while the appliance is being used

NuWave Brio 37001: How to dissasemble a Nuwave Briio 6qt Airfryer

Sun, 29 Jun 2025 14:51:15 -0700

I have tried to search on the internet but to no avail except one video I found here on this website. which allowed me to join this forum. The video did show completely how to dissasemble it completely to get to the circuit board. Mine quit while I was using it. All power is gone. Presuming it shorted out due to bugs inside most likely.

⟐ Answered June 29, 2025 at 14:51 MST

Ninja Foodi DZ401: I need to purchase the outer casing

Thu, 12 Jun 2025 20:33:57 -0700

I would like to know where I can buy the outer casing of this machine to be replaced. I really appreciate your help.

Ninja Foodi SP101: How to Remove Side Panel?

Fri, 30 May 2025 15:25:12 -0700

I have been struggling to get the side panel on this removed. I am aware the guide here says to unscrew the 3 screws and then push the panel towards the control panel until the clips are visibly detached

However I have not been able to produce this result with varying levels of force. There is something towards the control panel that is firmly holding that side of the panel in place no matter what I try.

Cosori TurboBlaze: Won't turn on

Mon, 14 Apr 2025 23:52:01 -0700

Device just stopped working out of the blue, one day it worked next morning will not turn on.

⟐ Commented April 14, 2025 at 23:52 MST

Breville BOV900: Front door not closing

Thu, 03 Apr 2025 09:27:19 -0700

Door not closing all the way