⟐ Commented January 18, 2024 at 3:13 MST

⟐ Commented September 05, 2023 at 5:29 MST

⟐ Answered October 13, 2018 at 5:44 MST

⟐ Edited May 21, 2024 at 2:03 MST

⟐ Commented December 07, 2023 at 18:47 MST

Help! Now I'm trying to charge it (nothing happens, just some heating in motherboard area)

Is it fixable? Did I burned the motherboard or something?

Do anyone have similar experiences with diy repairs?

Thank you

I will update if anything happens

⟐ Answer accepted May 18, 2019 at 8:09 MST

I broke the screen of my asus z500m tablet but it worked. I still could use it. After a day or so the screen was not working. It was black but illuminated. I unplugged and plugged it again the battery but nothing improved. If I plug it to AC sometimes turn on the screen illuminated but without image and blink. The motherboard it feels hot. I don’t know if it’s problem of the charging port or motherboard. Is it possible to fix it?

⟐ Answered November 16, 2022 at 17:10 MST

When turned on, the buttons at the bottom will light up, but nothing will appear on the screen. When plugged into a computer, the computer will recognize it with its customary BING, so I know something's happening in there. I can't connect it to the computer because I can't get past the screen lock since I can't see it to unlock, but I know it's on because the computer finds it.

Just, no LCD.

Defective LCD? Or maybe I did something wrong with I installed? I've reseated all the flex cables several times, even took it all apart and put it back together to see if I missed anything, and I get the same results.

Thanks!

David

⟐ Answered October 21, 2022 at 11:18 MST

I have this old tablet Z500M called zenpad 3s 10. It become very slow and hanging so I think if I replaced the battery it will work better ? but I also can not find where I can buy this old battery ?

Thanks

⟐ Answer edited September 24, 2023 at 1:50 MST

⟐ Answered September 19, 2020 at 9:01 MST

The touch screen was working as normal when I started using the tablet. Some minutes after I found out by chance that part of the screen was cracked.

A bit after, the upper half of the touch screen stopped working. I restarted the device and the upper half continued bot working so I restarted it again and the whole touch screen stopped responding.

So, after many restarts, the display works, and I can see the lock screen but it doesn't respond to touch. The volume up/down and the home button still work.

Thanks a lot for any help (and sorry for such a long description).

⟐ Answered September 19, 2020 at 8:57 MST

⟐ Answered September 19, 2020 at 8:52 MST

A few months ago I bricked my Asus Z500M (non-LTE version) and now I'm not even able to connect it to my pc (stuck on boot logo and no download or recovery mode) and flash the raw software through the Asus Flash Tool.

I was wondering which one could be the best option:

1)Replace the logic board (100€), the biggest concern here is that I don't know if I will be able to use this tablet even with a different serial number/IMEI.

2)"Repair" the eMMC by reprogramming it (I have no idea of how it can be done or which tools are needed)

⟐ Commented February 27, 2019 at 10:18 MST

Does anyone have an idea where I could find the board, or how I could find out which special type of USB-C connector I need and where I can get it??

Any help is highly appreciated!

Cheers!

S

⟐ Answer accepted February 21, 2018 at 16:59 MST

I picked up a JW ( just wireless) home charger with dual usb to usb type-c kit

its rated at 17Watt/3.4 amp w a 3.0 quickcharge . Anyone know if this would be safe to use with the zenpad 3s 10? and if not can you point me towards what i should be seeking? thank you in advance.

⟐ Answer accepted December 15, 2017 at 11:09 MST

⟐ Edited by author July 27, 2024 at 14:57 MST

I didn’t want to ever purchase an ASUS because I have always believed them to be a pos. But I let myself get talked into buying this so now I’d like to get it to actually work.