iFixit - Answers With Device "3D Printer"

XYZprinting Da Vinci Mini W: How do I get it to stop clogging the nozzle so I can actually print th

Wed, 01 Apr 2026 02:33:55 -0700

The nozzle clogged up so fast and easy on my friend. I tried twice to unclog it before ultimately pulled the nozzle off and cleaned it out. But the printer seems like it's not getting hot enough or it is moving waaaaayyyyyy to fast to actually lay the print. Please help I'm losing my mind on this sht

Ender 3 Pro and V2 32 Bit: How to fix blue screen

Mon, 30 Mar 2026 19:50:48 -0700

It was working then just got blue screen 2 of them

Prusa MINI: Failed self test for axis with machine shaking

Wed, 18 Mar 2026 16:34:20 -0700

Things were not printing correctly, did self test and failed. While running test, the machine was shaking as well

Ender 3 V3 KE: Heat bed is not heating as expected : CB2565

Mon, 19 Jan 2026 03:18:09 -0700

Hello, my heating bed has been failing to "heat as expected" and throws an error code of CB2565. My question is does this code need a complete bed replacement or is it usually an easy fix? Also, if i need a new print bed, will the replacement bed for the SE work, or do I need a KE bed. I'm still new to 3d printing and this is my first hardware issue since i bought this printer a year ago.

Bambu Lab 3D Printer: will not feed while printing

Wed, 12 Nov 2025 16:29:24 -0700

will not print

Creality Ender 3 Pro: Why is my printer not wanting to print.

Mon, 03 Nov 2025 13:06:37 -0700

I recently got a Ender. 3 pro and installed new firmware on it because I had the blank blue screen. Once I did that, I tried running a print but all it did was heat up the extruded and bed, then acted like it completed the print.

Bambu A1 Mini: My printer won’t load

Fri, 24 Oct 2025 17:47:16 -0700

My printer will not load my new filament and will get stuck on the step to push the filament in even though it is already

FlashForge Adventurer 3: Trying to recalibrate after unclogging jam

Sun, 08 Jun 2025 08:03:41 -0700

The extruded got clogged with TPU. I took it apart and cleaned it out and put it back together. Now it won’t move properly. It will only bang against to back of the case along the x axis. I’ve tried recalibration and I’ve tried flashforge customer service. They are no help?!

Artillery Hornet: Z-axe and Extruder doesn't rotate

Tue, 29 Apr 2025 06:50:23 -0700

My Artillery Hornet (Ruby v1.2) is facing an issue to move the Z-axe and Extruder.

The Motors and their Drivers have been checked, they are ok. I already moved them by the other axes commands using an home made extension cable.

Ender 3 v2 Neo: The scroll wheel won’t work

Mon, 24 Mar 2025 15:14:54 -0700

The scroll wheel dosent do anything when turned

Creality 3D Printer: LED isnt working at all, no response, purchase a new one and still no

Fri, 14 Mar 2025 13:13:39 -0700

How can I repair this control box problem with the LED not even turning I've interchanged the new LED and the old LED screens and also interchanged the rainbow cord with the new cords they shipped, and still no response, how can I repair this LED to the older creality CR-10 series?

FlashForge Adventurer 3: My adventurer 3 is moving really slow

Wed, 19 Feb 2025 11:02:36 -0700

was working fine yesterday and when i turned it on today it was moving really slow, i tried updating it but was current on firmware, tried resetting printer, and still moving really slow.

Ender 3 v2 Neo: z axis flashing question marks.

Tue, 31 Dec 2024 21:24:26 -0700

i just got an ender 3 v2 neo and my z axis keeps flashing question marks and auto setting to 10. i have auto homed. reconfigured, stored configuration. and attempted to move z axis with knob and nothing is working with z axis. i have even replaced x axis motor and nothing is changing. i need help. System info shows v1.1.8c

when 'moving z axis, motor will only move item upward.

⟐ Edited by author December 31, 2024 at 21:24 MST

XYZ Printing da Vinci Junior 1.0: Error 0014 on Da Vinci jr 1.0 refurbished

Thu, 05 Dec 2024 06:51:45 -0700

I had my Da Vinci Jr 1.0 turned off for a while And just turned it back on in an attempt to print something for my sister, and when i told it to load the fliament, it gave me an error 0014. I looked it up and it is an error with the extruder heating. I tried to fix it by checking the connections and rebooting the printer, but to no avail. Any suggestions or fixes? The printer is refurbished, so I have no clue if that is the problem, or if it is just the hardware.

⟐ Commented December 05, 2024 at 6:51 MST

FlashForge Adventurer 3: Adventurer 3 Faulty/blank screen

Wed, 06 Nov 2024 04:36:09 -0700

My Adventurer 3 display screen is blank! Please help.

Prusa B1 Printer by 3DP: Why is the table not getting hot enough?

Tue, 29 Oct 2024 01:32:32 -0700

The table is not preheating. Everything else seems fine.

Creality Ender 3 Pro: How can I remove broken filament from the hose

Sat, 12 Oct 2024 22:46:12 -0700

I have a problem where the efter cannot move the filament forward and very little is coming out through the nozzle. Unfortunately the filament is broken inside the house so I cannot get out the cut off filament att the end.

Is the problem with the exrruder or the hot end or something else?

CR-10 V2: Screw for heating block to lock heating cartridge

Thu, 20 Jun 2024 06:11:43 -0700

Hi.

Does anyone know what size screw the CR-10 V2 uses for the screw that fasten the heating cartridge to the heating block?

AHA 3D: I have a problem with my aha 3d printer, reset button fused

Mon, 27 May 2024 22:14:20 -0700

I have a problem with my aha 3d printer, reset button fused, display not working can you please help in repairing this

Anycubic Vyper: Why is my hotend clogging

Sun, 28 Apr 2024 09:24:41 -0700

Some filament got In there and cooled or burn is is not budging and no Filomena is coming out. Please help

⟐ Commented April 28, 2024 at 9:24 MST