iFixit - Answers With Device "1998-2002 Mazda 626"

1998-2002 Mazda 626: не работает вентилятор радиатора

Mon, 02 Mar 2026 08:39:40 -0700

где дачик вентилятора мазда

⟐ Commented March 02, 2026 at 8:39 MST

1998-2002 Mazda 626: My Mazda capella doesn't have spark..l changed camshafts sensor and st

Fri, 13 Feb 2026 19:00:04 -0700

My Mazda capella doesn't have spark..l changed camshafts sensor and still no spark what could be the problem?

⟐ Answered February 13, 2026 at 19:00 MST

1998-2002 Mazda 626: Where is the OBD2 port located

Fri, 16 Jan 2026 21:14:22 -0700

Where is the OBD2 connector port in my 2001 Mazda 626

⟐ Commented January 16, 2026 at 21:14 MST

1998-2002 Mazda 626: I need a photo or diagram showing where exactly is the starter relay?

Fri, 22 Aug 2025 15:55:21 -0700

Sorry for some reason your site didn’t post my text. I have a 2000 Mazda 626 LX 4 cyl. I need a photo or diagram showing EXACTLY where the starter relay is. I know it’s in the engine compartment, prolly 1 of the relays right next to the fuse box. See the photos I just posted. It is not labeled. Not 1 of the relays inside the fuse box.

Can anybody help?

Thanks

Scott

Hey thanks! I checked thoroughly (see photos) those locations in engine compartment but didn’t find anything that looked like a relay. It’s def NOT in the fuse box in the pass compartment. And it looks like it’s not in fuse box in engine compartment. I have electrical wiring diagrams for 1997 (couldn’t find 2000 online) Mazda 626 that show there is a starter interrupt relay somewhere. +12v comes from ignition switch when in start position. Goes first to starter interrupt relay, then if that contact is closed, goes to park/neutral switch on transaxle. Obviously you can only start if you’re in park or neutral. Then +12v goes to relay inside starter, that closes hi current contacts and sends hi current +12v directly from battery to starter motor.

Symptoms are sometimes it won’t start. Most of the time it starts but when it doesn’t you don’t hear the solenoid doing its thing, don’t hear the starter trying to start the engine. Don’t hear any clicking sounds but I’m sitting inside car so I could be too far away. Battery is good, 13v, connections at battery are good. Could be failing starter, failing starter interrupt relay, failing ignition switch, etc.

Thanks Scott

⟐ Answered August 22, 2025 at 15:55 MST

1998-2002 Mazda 626: My parking lights and tail lights not working, I have

Mon, 11 Nov 2024 09:41:29 -0700

Hi my parking lights and tail lights not working, I have checked all the fuses and they are good. I found a wire that's coming from the fuse box and didn't find where it's going to. You can se it from the picture I will upload

1998-2002 Mazda 626: How put the transmission

Tue, 08 Oct 2024 23:10:32 -0700

Put back to getther

⟐ Commented October 08, 2024 at 23:10 MST

1998-2002 Mazda 626: Where is the fuel pump relay?

Fri, 27 Oct 2023 13:38:34 -0700

I need more specific answer for 1998 Mazda 626 four cylinder. Where is the fuel pump relay?

Is it the relay marked EGI or the Circuit Relay?

⟐ Commented October 27, 2023 at 13:38 MST

1998-2002 Mazda 626: Why is it cranking but no start?

Fri, 26 May 2023 05:13:52 -0700

as soon as try to crank it all power shuts off and no start.

⟐ Answered May 26, 2023 at 5:13 MST

1998-2002 Mazda 626: Which relay on fuse block is for the fuel pump?

Sun, 15 Jan 2023 12:00:23 -0700

Not getting fuel to motor. Don't hear fuel pump when turn key on. Fuse is good on fuse block. Thought there might be a relay. Also looking for a repair manual in anticipation of replacing the fuel pump. Any help with testing circuit greatly appreciated.Is there a way to put power directly to fuel pump?

⟐ Commented January 15, 2023 at 12:00 MST

1998-2002 Mazda 626: Fuel pump 2000 Mazda Lx 626

Sun, 15 Jan 2023 11:54:52 -0700

Fuel pump not working,I no longer hear the pump run when ignition is on. I drove home ok. And next morning wouldn't start . I finally found relay marked EGi,relay is good...is there a injector fuse on a 2000 Mazda LX 626 ? Any other suggestions to remedy problem would be appreciated.

⟐ Commented January 15, 2023 at 11:54 MST

1998-2002 Mazda 626: 2001 Mazda 626 V6 GD7E-41-660 throttle cable. I'm looking to buy?

Thu, 18 Aug 2022 18:05:30 -0700

I am looking for a thottle cable for my 2001 Mazda 626 V6. The original part number is GD7E-41-660. Anyone have one they would sell?

⟐ Commented August 18, 2022 at 18:05 MST

1998-2002 Mazda 626: Where is the intake air temperature sensor located?

Fri, 29 Oct 2021 13:54:07 -0700

My check engine light is on so I did a code check at my local parts store, the scanner said my problem is an intake air temp. sensor. My problem is I can,t find it. Please help. The reason I had it checked is because it takes me 30 min. sometimes to get it started. I've replaced fuel pump, air charged sensor, head work done, stopped the heating problem now I would like for it to start when I turn the key.

⟐ Answer deleted October 29, 2021 at 13:54 MST

1998-2002 Mazda 626: Why is my car making weird sounds straight after starting up?

Fri, 29 Jan 2021 17:53:18 -0700

Start the car pop pop pop out the exhaust also sounds like it's running very bad. First time ever today

⟐ Commented January 29, 2021 at 17:53 MST

1998-2002 Mazda 626: I cant get my car outta the park position.

Sat, 05 Dec 2020 00:45:05 -0700

I am unable to get my car out of park. When i press down the brake pedal and press down the knob on my gear shifter (automatic) i feel a clicking and hear a clicking noise....any help or advice as to what part needs to be replaced and how to fix it would be appreciated.

⟐ Commented December 05, 2020 at 0:45 MST

1998-2002 Mazda 626: Why the power window doesn't work?

Wed, 20 May 2020 06:39:25 -0700

I have a 1999 mazda 626 with a 2.0 L engine and the driver’s side window doesn’t work. How can I check to see if the switch is bad or maybe the motor?

Thanks for your help,

James

Orlando, Florida

⟐ Answer accepted May 20, 2020 at 6:39 MST

1998-2002 Mazda 626: Light Bulbs in front headlights

Sun, 15 Mar 2020 17:31:44 -0700

How to change the bulbs in front headlights?

⟐ Commented March 15, 2020 at 17:31 MST

1998-2002 Mazda 626: 88 Mazda 626 2.2L crank no start no fuel pressure

Mon, 13 Jan 2020 21:41:26 -0700

I have a 88 Mazda 626 dx with the 2.2L. The car was stalling out but stayed on the force feed fuel but turned off when let off the gas. Replaced the fuel pump fuel filter spark plugs and wires cap and rotor ignition coil and battery and it just cranks with no start I pulled the pump out and ran direct power to the pump and it ran good. But still not getting any fuel in the lines to start. When thru all the fuses and the only one that was blown was the fog lights. Can’t seem to find the fuel pump relay. I did unplug and test all the plugs for the relay to see if their getting power without a crank and they all seem too. So I’m stuck. Please help. No inursa switch either….

⟐ Commented January 13, 2020 at 21:41 MST

1998-2002 Mazda 626: How do I replace lower ball joints?

Thu, 05 Sep 2019 10:14:29 -0700

I can't find any info on how to replace the lower ball joints on my 1998 Mazda 626

⟐ Answered September 05, 2019 at 10:14 MST

1998-2002 Mazda 626: How to install right side front window regulator in a 1998 Mazda

Fri, 23 Aug 2019 10:29:41 -0700

How to install passenger side front window regulator in a 1998 Mazda 626. Do the cables go twisted?

⟐ Answered August 23, 2019 at 10:29 MST

1998-2002 Mazda 626: Wrong wheel bearing grease

Thu, 06 Jun 2019 05:15:58 -0700

Just replaced front wheel bearings on my Mazda 121 disc brake front and now I'm worried about the grease I used. Valvoline moly grease EP 3%. NLGI 2. Says it's high temp but dropping point is only 195 celcius or 383 fahrenheit. Will the grease melt and cause bearing failure?

⟐ Answer unaccepted June 06, 2019 at 5:15 MST