iFixit - Answers With Device "1995-2001 BMW 7 Series"

1995-2001 BMW 7 Series: timing chain tension can it be done with out the special tools

Tue, 04 Feb 2014 18:40:12 -0700

For a BMW 740iL, BMW require you to use a special tool to adjust the tension on the timing chain for a M62 series 740iL V-8 5.75liter engine dated 08-1998?

⟐ Answer accepted February 04, 2014 at 18:40 MST

1995-2001 BMW 7 Series: no heat inside the car

Sun, 18 Nov 2018 10:09:58 -0700

Car not putting out heat

⟐ Answered November 18, 2018 at 10:09 MST

1995-2001 BMW 7 Series: What is the size of my Water pump bolts sizes

Wed, 23 Aug 2023 02:43:44 -0700

What size are the mounting bolts of a 1998 bmw waterpump

⟐ Commented August 23, 2023 at 2:43 MST

1995-2001 BMW 7 Series: Abs icon at the speedometer light turn on

Mon, 22 Aug 2022 07:27:26 -0700

i have bmw 728i

the abs indicator is on at the speedometer panel ,what is the problem and how i can fix it?.

the speedometer doesn't work .

can i have manual book ?

⟐ Answered August 22, 2022 at 7:27 MST

1995-2001 BMW 7 Series: Fan keeps breaking up

Wed, 28 Dec 2016 15:46:59 -0700

Fan replaced twice but keeps smashing up into bits

⟐ Edited December 28, 2016 at 15:46 MST

1995-2001 BMW 7 Series: Why is my water cooled alternator not working when car warm up

Sun, 29 Mar 2020 15:31:08 -0700

Will water cooled alternator not work if engine coolant not in it . Once my car warm up the alternator light stays on but dont come on when it's cold

1995-2001 BMW 7 Series: BMW E38 Rear View Camera installation

Wed, 29 Jul 2015 08:33:36 -0700

Hello

I got the relay switching from bimmernav.com

Same as the one you got in the pictures.

Installed everything as describe:

87= Yellow (connected to ground chassis)

85=Red (connected to ground chassis)

30= Blue (to blue connector pin #17 video module)

86=White (to reverse 12+ wire in the tail light)

The RCA cable to the pins #13 (power input) and #14 (ground input) of the white plug (video module)

However when I put the car in reverse the screen turns black; like if the camera was not connected, but I check the camera with my camera security tester and it is video coming through.

And then when I plug and unplug the connector from the TV video module it works one time and them does not work.

Any ideas what could be the reason?

Best regards

Rey