iFixit - Answers With Device "1992-2000 GMC Yukon"

1992-2000 GMC Yukon: Will a steering column out a 96 GMC fit a 95 Yukon

Thu, 02 Sep 2021 10:09:54 -0700

Will a steering column out of a 96 GMC pick up without cruise or tilt work in a 95 Yukon with cruise and tilt

⟐ Commented September 02, 2021 at 10:09 MST

1992-2000 GMC Yukon: What years are interchangeable on A 1993 GMC K2500 4X4 Suburban

Tue, 10 Dec 2019 15:45:17 -0700

Hello,

Just wondering if I can use the door and the APilar w/ part of the roof off of a 1996 GMC to replace my damaged 1993 burban

⟐ Answer accepted December 10, 2019 at 15:45 MST

1992-2000 GMC Yukon: Interchangeable parts for gmc and suburbans

Fri, 30 Dec 2022 15:45:18 -0700

Is a waterpump for a 1999 gmc yukon interchangeable with a 2001 chevy suburban

1992-2000 GMC Yukon: Intake Manifold gasket replacement

Mon, 24 Jun 2019 20:16:56 -0700

how to replace intake manifold gasket

⟐ Commented June 24, 2019 at 20:16 MST

1992-2000 GMC Yukon: What is the wiring color code for all wiring connected to steering Col

Thu, 29 Nov 2018 19:33:49 -0700

I need to rewire the wires that connect. To turn signals, hazards & all others the are some how connected to the steering Colin, please tell me what each color is like a color coded diagram and wiring diagram?

1992-2000 GMC Yukon: Am I missing something after valve job and truck won't start now?

Wed, 28 Nov 2018 01:37:10 -0700

5.7 Vortec engine in a 1999 Yukon SLT. Took the heads off for a blown valve seal, had all seals replaced and heads milled. Truck sat for 2 weeks before I got to put everything back together. By everything I mean the lower and upper intake, distributor, alternator, ignition control module and coil, throttle body, spider assembly, took everything off to clean up and put back on. All connections are plugged back into the right sensors/spots. The truck will crank but won't start. Engine is turning. I have fuel to the spider assembly and fire from all spark plugs and wires. Changed cam and crankshaft sensors also. Is there something I'm overlooking?

1992-2000 GMC Yukon: Battery draining but alternator and battery are brand new

Thu, 12 Jul 2018 05:21:09 -0700

I have a 99 gmc Yukon my battery keeps dying it all start one day i was driving and my battery gauge when down and killed on me while driving got a jump same problem happened changed the battery and the alternator still the same problem after the battery life dies took the alternator to get tested its perfect and brand new battery is brand new and dead as a door knob keeps happening whats my problem?

1992-2000 GMC Yukon: brake lights not working please help

Tue, 08 May 2018 19:15:12 -0700

I know this is a very common problem with these GMC trucks but this driving me crazy now, i just bought this 96 gmc yukon never thought about checking all the lights working before purchasing until i got pulled over for no brake lights no running light well to keep it short the taillight wiring under the truck is a mess! the previous owner installed one of those LED strips that go on your bumper and messed the wiring all up BAD so i pulled the whole wiring harness out and ordered a new one. Now i have running lights, both turn signals, reverse lights hazards and JUST THE TOP BRAKE light no lower brakes lights. If i run power manually to the lights they work so i know my mother boards are good, checked all the fuses , they look fine what has me really confused is that it doesnt have a brake light relay? there is a location for it but it has no power/wiring to the slots? the cover also states it should have a big fuse for the STOP/ HAZ lights and its the same thing no fuse there and nothing running to the slots? after some research i decided to change the brake switch just because it was a cheaper option still the problem well then i changed the multi function switch still the same problem i did notice that the switch has a small 2 wire harness that i have no where to install it on? Any help is GREATLY appreciated as im going crazy trying to fix this!